Toz 35 grip screw sizes?

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
forage16
Posts: 3
Joined: Sat Mar 10, 2007 3:12 pm

Toz 35 grip screw sizes?

Post by forage16 »

I'm trying to find replacement screws for a Toz 35 grip. I was wondering if anyone here on the forum knew the length of the screws I need to buy? I believe they are M3 threads.

Thanks and happy holidays!
Top
top end
Posts: 88
Joined: Sat Mar 13, 2004 11:35 pm
Location: Darwin, Australia

Post by top end »

They vary and will probably need to be individually fitted for length. If you buy M3x25, and cut to length you can't go wrong.
Top
SMBeyer
Posts: 149
Joined: Wed Mar 17, 2010 10:06 pm
Location: Illinois

Post by SMBeyer »

I found very nice allen head ones at Ace Hardware and they had many different lengths.
Top
doughert@ptd.net
Posts: 18
Joined: Tue Sep 14, 2010 7:56 pm
Location: Pennsylvania

TOZ screw sizes

Post by doughert@ptd.net »

The grip screw size on mine is 3mm diameter, .5 pitch (coarse), lengths are 1 ea - 24mm and 2 ea - 13.68mm

The size for mounting the sight blade to the carrier is 2mm diameter, .4 pitch, 3mm length.

Brownell's makes a nice tool called the Metric Screw Check'R No 1 - very handy...
Top
Post Reply

Return to “Olympic Pistol”