Question on Font hand-rest offset

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
hardhit
Posts: 19
Joined: Sun Feb 06, 2005 7:43 am

Question on Font hand-rest offset

Post by hardhit »

Hi All,

I have bought a new front hand-rest and this can be set in off center position, my question is, is this within the ISSF air rifle rules?

I have checked in the rule book items 7.4.2.6 and 7.4.2.7 and according to how I read this the off center setting is not a rule violation.

I just wanted to get some other opinions.

Regards,
Peter
Attachments
With the red lines I tried to mark the gun's center line and the now off set hand rest center line.
With the red lines I tried to mark the gun's center line and the now off set hand rest center line.
With the red lines I tried to mark the gun's center line and the now off set hand rest center line.
With the red lines I tried to mark the gun's center line and the now off set hand rest center line.
With the red lines I tried to mark the gun's center line and the now off set hand rest center line.
With the red lines I tried to mark the gun's center line and the now off set hand rest center line.
Top
gtrisdale
Posts: 41
Joined: Sat Sep 12, 2009 3:45 pm
Location: Aurora, CO

Post by gtrisdale »

You should be OK as long as the width of the rifle stock and rest is less than 60mm (rule 7.4.2.7.i)
Top
hardhit
Posts: 19
Joined: Sun Feb 06, 2005 7:43 am

Post by hardhit »

Thanks for the info.
The total width of the stock + rest is 55 mm so that's fine too.
Top
Post Reply

Return to “Olympic Rifle - Air and Smallbore”