LP10 fill recommendation
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
LP10 fill recommendation
I just ordered an LP10 from Pilkguns and was wondering what bar pressure one should refill the cylinder at before POI starts to change? In the description of the LP10 it stated the pistol is regulated to 55 bar. How close to 55 bar should one shoot before a refill?
Thanks,
Stu
Thanks,
Stu
- John Marchant
- Posts: 192
- Joined: Fri Apr 29, 2005 4:35 pm
- Location: Bedfordshire, England
- Contact:
In the pellet testing I did with a single model of the Morini, I noticed a deterioration of the accuracy shortly before the lockout kicked in.
With my LP1, I just fill it after about 150 to 200 shots (shaker box count) have been shot, although I can shoot over 200 since I have it adjusted to 525 fps with light pellets.
With my LP1, I just fill it after about 150 to 200 shots (shaker box count) have been shot, although I can shoot over 200 since I have it adjusted to 525 fps with light pellets.
The morini ceases firing the steyr just carries on - or my lp10 certainly does. I can get well into the yellow as I have done accidentally before now. I can get up to 140 odd shots before noticing any deterioration, but as mentioned it depends on the velocity settings. As a note you can normally hear the sound change before the POI changes (at least that's my experience).Brian M wrote:Do they drop? Or does the pistol just not fire? I seem to remember someone saying that the Morini would just cease firing once the pressure got too low.
I have no clue, I tend to fill up shortly after the manometer needle dips into the yellow.
Rob.
The LP 10's do not lock out at low pressure. I try to fill mine after every practice and ensure they are full prior to any match. You're really not getting anything extra by shooting them down really low, it just reduces the pressure in your big tank faster. If you're using a pump it just means you have to pump it more.
Last edited by Richard H on Tue Dec 13, 2011 8:56 pm, edited 1 time in total.
-
- Posts: 5617
- Joined: Mon Mar 01, 2004 12:49 pm
- Location: Ruislip, UK
Very sensible. I always laugh (to myself) when shooters ask permission to take their guns off the firing point during a match to change a cylinder.Richard H wrote:I try to fill mine after every practice and ensure they are full prior to any match.
That's normally the result of sloppy (or non-existent) preparation.