HI
Great site
I currently have a BRNO CZ#4 (magazine feed) it has a typical hunter stock. I would like to practice prone shooting and was wondering if i could drop my CZ in a right bolt left hand Anschutz.
Thanks
Trevor
Brno CZ #4 and Anschutz prone stock
Moderators: pilkguns, Marcus, m1963, David Levene, Spencer
Hello Trevor,
no, a CZ will not fit into an Anschutz Match 54 stock with no work. The receivers are not the same size, and the location of the bedding screws will not match. It probably could be done, but it would require bedding the CZ action with epoxy, and drilling new holes for the bedding screws. If you aren't techically competent, this would be a job for a gunsmith.
It might be cheaper to look for a used Anschutz just for prone.
Tim s
no, a CZ will not fit into an Anschutz Match 54 stock with no work. The receivers are not the same size, and the location of the bedding screws will not match. It probably could be done, but it would require bedding the CZ action with epoxy, and drilling new holes for the bedding screws. If you aren't techically competent, this would be a job for a gunsmith.
It might be cheaper to look for a used Anschutz just for prone.
Tim s