Manurhin .32 Sport

mjackson · Post by **mjackson** » Sat May 28, 2011 11:58 pm

I found my first Manurhin revolver and it's a MR-73 Sport chambered in .32 Long. Does anyone know if the cylinder chambers are the same diameter as the MR-32 Match?

David M · Post by **David M** » Sun May 29, 2011 1:40 am

To the best of my knowledge they are the same.
The Sport is a double action/single action with a square grip frame, partridge front sight and a squared rear sight (on the frame). The .32 is a 6" barrel and the .38 is about 5 3/4".
The Match is single action only with a interchangable foresight and a extended rear sight (past the back of the frame, over the hammer).

mjackson · Post by **mjackson** » Sun May 29, 2011 11:16 am

Thank you, David.

A74BEDLM · Post by **A74BEDLM** » Tue May 31, 2011 10:59 am

Does anyone else have a MR32?

I need some information on the rear and front sights.

My front sight is 3.5mm and my rear sight has a fixed 3mm notch and a 1 stamped on the removable blade part.

What is stamped on yours/measurements in mm?

Thanks