The proper way to light a Scatt...

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
tsokasn
Posts: 299
Joined: Tue Sep 11, 2007 12:22 am
Location: Athens,Hellas

The proper way to light a Scatt...

Post by tsokasn »

I've been dealing a problem with my living room Scatt range lighting conditions...
While the target is more than enough lighted,my iris sight is very bad.
I mean that the iris circle is not very good (like in normal conditions) and I can't align very well the circles.
Even if I leave the light that's exactly over my standing position on,it doesn't helps.

Any ideas?

Thank you.
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

You could try shining a halogen spotlight onto the ceiling to get an indirect and more even overall lighting (plus another one lighting the target).

Rob.
Soupy44
Posts: 411
Joined: Thu Nov 27, 2008 5:37 pm
Location: Raleigh, NC

Post by Soupy44 »

Sounds like you need to replace your rear iris. The light on your iris is not important. The light you need to worry about comes from the target. If the target has plenty of light, and you are using a good sized front aperture that leaves a good white ring around the bull, the only things left are your rear sight and your eye.
tsokasn
Posts: 299
Joined: Tue Sep 11, 2007 12:22 am
Location: Athens,Hellas

Post by tsokasn »

RobStubbs

I'll try to light more the room.

Soupy44

You mean that I must change the rear sight's position?
In the range(where light conditions are under the rule) I don't have this kind of problem.
I will sure give it a try.
Post Reply