Problem with new gun

Guest · Post by **Guest** » Thu Jul 29, 2010 6:06 am

Hi guys, I just got a new 1913 Anschutz. However I unintentionally got the uncocked bolt stuck in the barrel. Do you guys know how to help me out?

Thanks in advance.

Hemmers · Post by **Hemmers** » Thu Jul 29, 2010 6:34 am

Try and recock it.
Otherwise just a matter of wiggling it.
It went in, so there must be a way to get it back out.

That's about all you can do short of taking the barrel and action out of the stock, removing the trigger unit, dropping the baseplate out, etc, etc (i.e. stripping down the action till it comes free).
You shouldn't need to do that though. Just push/pull and wiggle.

Guest · Post by **Guest** » Thu Jul 29, 2010 6:52 am

Thanks!!

Anschutz · Post by **Anschutz** » Sat Jul 31, 2010 3:28 am

have you pressed the bolt release button on the left hand side of the action before sliding it out, sorry if it sounds a dumb answer. Colin