Adjusting sights

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
darticus
Posts: 318
Joined: Sat Sep 03, 2005 11:01 am
Location: SPARTA NEW JERSEY

Adjusting sights

Post by darticus »

I have an Lp1 and notice that a group of targets, that I left, below the target I'm shooting have a large hole from 50 pellets I shot, to the right of the bull. Does this mean or indicate I should adjust my sight a little toward the bull or left?
2650 Plus

Move the sight

Post by 2650 Plus »

With a large collection of holes somewhere other than the ten ring .IMHO you should have made the sight correction many shots before the large collection of off center hits occurred. Good Shooting Bill Horton [That is why the sight is adjustable]
Makris D. G.
Posts: 123
Joined: Fri Apr 10, 2009 10:24 am
Location: Athens, HELLAS (GR)

Post by Makris D. G. »

As the manual states, the sights are marked for the error you want to correct.
This is common with most German, Austrian, Swiss guns.
So if you are grouping to the right, you adjust the sight towards R.
Post Reply