Anyone out there know what type of "muzzle brake" this is? Not sure if that is the proper term for the part??
It appears to have 3 possible positions but I am not clear as to what the affect would be in each position.
Was not sure if the holes are for relocation of the part itself, relocation of the front sight, or both??
Are the remaining threaded holes supposed to be open or plugged??
It took some doing to get the part loose due to leading.
Any suggestions on how to get the lead build up out??
Tom
Muzzle brake position on CM84E??
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
THREEDFLYER
- Posts: 41
- Joined: Tue May 25, 2010 12:42 am
- Location: Prescott Valley, AZ
Muzzle brake position on CM84E??
- Attachments
-
- IMG_2294.JPG (33.91 KiB) Viewed 1504 times
-
- IMG_2295.JPG (33.07 KiB) Viewed 1504 times
-
- IMG_2297.JPG (26.62 KiB) Viewed 1504 times
Muzzle compensator from Morini
It is Muzzle compensator
http://www.morini.ch/images/CM84E/p13.JPG
The front site relocation option is for changing the sight radius
http://www.morini.ch/images/CM84E/p13.JPG
The front site relocation option is for changing the sight radius
-
THREEDFLYER
- Posts: 41
- Joined: Tue May 25, 2010 12:42 am
- Location: Prescott Valley, AZ
Compensator
Thanks for the post and the link.
Is this designed to be fully extended or can the position of the compensator itself be changed using the different screw hole locations??
Is this designed to be fully extended or can the position of the compensator itself be changed using the different screw hole locations??