Hertenberger .32 Brass

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
customs954
Posts: 40
Joined: Mon May 11, 2009 10:40 am
Location: Kelowna, B.C.

Hertenberger .32 Brass

Post by customs954 »

Just purchased 1000 new .32 Hertenberger brass cases. Has anyone had any big issues using dillon press and dies to load wadcutters. I've never used these before, always Lapua or winchester. Just wondering if the wall dimensions are the same as other brass or are they going to be tight in the dies. Any comments or experiences would be appreciated. Will be loading for new pardini .32.
Top
User avatar
Richard H
Posts: 2654
Joined: Mon Mar 01, 2004 11:55 am
Location: Guelph, Ontario
Contact:
Contact Richard H

Post by Richard H »

I have a bunch and have never had any issues. I use a Dillion 550.
Top
Tycho
Posts: 1049
Joined: Tue Jul 25, 2006 1:25 am
Location: Switzerland

Post by Tycho »

I'm shooting a mix of Lapua, Hirtenberger (that's the right spelling, btw) and Geco, no problems at all. The Hirtenberger cases have a pretty sharp angle around the primer pocket, I crunch up slightly more primers on them than on the other ones, but that's not really an issue.
Top
Post Reply

Return to “Olympic Pistol”