Walther LG300 bloob tube

yana · Post by **yana** » Fri Apr 09, 2010 1:41 pm

I just ordered a Sondermodelle LG300, blue stock. It has the same short frontsight tube/holder as the junior version. I'd like to mount the tube thats on the other LG300's though. I like its looks better. Where to get this tube? Its not on the walther site..

JSBmatch · Post by **JSBmatch** » Sat Apr 10, 2010 10:46 am

I can't offer an easy solution, but try E Mailing Walther and explain what you want to do.

JSB

Walther101 · Post by **Walther101** » Sat Apr 10, 2010 1:07 pm

I bought one from Champions Choice not long ago. when I received it the order form said Discontinued, so you should check with them and see if they have any left. It was not the exact same as the one that came with my Walther. Mine had LG300XT on one side and Walther on the other cut out of the tube. The one I ordered has Walther on one side, and absorber on the other just embossed in the aluminum.

Walther101

yana · Post by **yana** » Tue Apr 13, 2010 11:56 am

Thanks for that Walther. Found it, and its not too expensive.
They wont sent outside the US though..

I tried filling my new walther's cilinder today. Unfortunately, my 2 bottles were very low on pressure (120 and 160 bar..). When releasing the air out of the filling kit, the cilinder emptied with it as well..:(
Is that because fillpressure was still too low for the valve to close? Or is it a cilinder problem??

robf · Post by **robf** » Tue Apr 13, 2010 5:58 pm

should close with 160...

yana · Post by **yana** » Wed Apr 14, 2010 3:18 am

I had the idea something tríed to happen at the 160 bar fill, it was different than with the 120 bar fill, but it emptied anyway..
Maybe my meter is a tad off, dunno how accurate those filling gauges are..
Might've been a real 155 for all I know..

robf · Post by **robf** » Wed Apr 14, 2010 3:27 am

yana wrote:I had the idea something tríed to happen at the 160 bar fill, it was different than with the 120 bar fill, but it emptied anyway..
Maybe my meter is a tad off, dunno how accurate those filling gauges are..
Might've been a real 155 for all I know..

still shouldn't free flow... your pressures have to be way low for that to happen.

if it does it again, put it on the bottle again quick and screw her on, open the air, and release it quickly... see what happens. Possibly you have a bit of crap on the valve.

yana · Post by **yana** » Thu Apr 15, 2010 10:29 am

Took the cilinder to the gunshop. He screwed it directly onto a bottle with the adapter (no filling kit between it) and it filled to 250bar no problem??
He said it shouldnt be filled with a fillkit but directly??
Wonder why, I use it for all my other pcp's..
Dont like filling directly on the bottle; sóme only allow 200bars and some cilinder mano's arent reliable..
He also had a longer sight tube for the 300. Allthough without the grooves and without Walther etc on it.