Best Possible Prone Groups?

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
BJ
Posts: 64
Joined: Mon May 26, 2008 11:56 am
Location: Raleigh, NC

Best Possible Prone Groups?

Post by BJ »

Hi everyone,

I've been shooting NRA prone for 2 years now, achieved my Master classification and I'm wondering what degree of accuracy can humanely be achieved.

Essentially I want to know what size groups the best prone shooters can shoot? I realize its perfectly possible to clean an A-51 target with a 10mm ten ring but the group does not have to be under 10mm to do that.

Rimfire benchrest shooters can’t seem to produce one bullet hole groups approximately 5.5mm very frequently. With this in mind would it be unreasonable to expect yourself to shoot lets say 6 to 7mm groups in position?

How do you truly determine what it is that is affecting your groups the most, wind, ammo, hold, your mind?

Brian
Soupy44
Posts: 411
Joined: Thu Nov 27, 2008 5:37 pm
Location: Raleigh, NC

Post by Soupy44 »

If you do the math, you can technically clean an international target with a 21mm group (10mm ring, 5.5mm round). Obviously we all know we can do better than that.

A group where the centers of all shots are inside the ten ring is a 15.5mm group. Again I know we can do better than that. I feel this is also the rough size of the test group you get from Anschutz with most rifles. Those groups are shot with the action pretty much bolted down.

A one hole group is 5.5mm. I've had a couple of groups from time to time that you couldn't fit a Bic ball point pen through, but I consider them exceptional.

A group which fits inside the 10 ring would be 10mm. These aren't exceptional groups, but still pretty darn good, certainly above average. i have sometime thought of this as the line where anything smaller starts to use a hint of luck in the ammo that is out of human control.

So 6mm is a one hole group, 10mm is where things start getting our of your control, and 15mm is pretty easy. I'd have 10mm as my goal size. That technically leaves you an 11mm margin of error for an errant round of ammo.

As for human ability, I've shot 106 strings dry firing on noptel on good days.
Guest

Post by Guest »

Hi Brian, take a look at this page, its the result from the ISAS indoor competison 2008 - prone match. Click on the pdf document to the right to see the shooters 10 shot groups. This might give you a ideer of the how the best prone shooters in the world shoots.

http://www.wsb-home.de/isas08/listen.php?d=1.80.10

Cheers, Ken
sting
Posts: 5
Joined: Mon Mar 16, 2009 3:58 am

60 shots prone

Post by sting »

51 *

Cheers, Ken ;-)
Attachments
Royal League 140209.pdf
(445.92 KiB) Downloaded 437 times
Guest

Prone shooter blog is up running

Post by Guest »

Guest

Post by Guest »

Anonymous wrote:Hi Brian, take a look at this page, its the result from the ISAS indoor competison 2008 - prone match. Click on the pdf document to the right to see the shooters 10 shot groups. This might give you a ideer of the how the best prone shooters in the world shoots.

http://www.wsb-home.de/isas08/listen.php?d=1.80.10

Cheers, Ken
Not 100% sure but I think this competition was shot at 50M indoors. Colin
Guest

results isas 2009 prone

Post by Guest »

Here is the results from 2009

http://www.wsb-home.de/isas09/listen.php?d=1.80.10

And yes this is a indoor competition.
BartP
Posts: 149
Joined: Wed Apr 23, 2008 9:18 pm
Location: Charleston, SC, USA

Indoor?!!

Post by BartP »

So this was an INDOOR 50 meter shoot?! Interesting. I would have thought that the scores would be higher - and they were. A 596 to make the final seems reasonable. BUT...by looking at the groupings of the top performers, even the best of these shooters have very few groups inside the 12-14 mm range. THAT is a surprise. My guess would have been that, without wind or mirage, these groups could have been far tighter on average. Was it cold? March in Germany can be a touch chilly.

The odd thing is that the top Finals scores were pretty darn good. Was it possibly warmer by then? I'd love to know what the temperature was. If anybody knows, send it along. Otherwise I'll have to call Vinni and Josh and find out what the heck was going on! :)

Bp
BartP
Posts: 149
Joined: Wed Apr 23, 2008 9:18 pm
Location: Charleston, SC, USA

Notes from A buddy

Post by BartP »

Brian,

I retrieved an email from Eric U. where we were discussing noptel analysis and live fire shooting. On the noptel, he had tons of 106+ strings and felt that was about average. He knew he was doing well when he shot over 107. He knew he was stinking when he shot in the 105s and below.

His comment was that since the beginning of the year, he had fired 6 perfect 600s in practice. And right before the fall selections (in which he shot two more 600s), his live-fire strings were higher than his average noptel results. My guess is that meant he was routinely shooting around 106.0 to 107.0 strings. Not sure what that equates to in terms of group diameters, but I would think they would be in the range of 11-12 mm at the most. He also mentioned that this was the first time in his life that his live-fire strings either matched or out-performed his live fire strings. Interesting.

Bp
Guest 66

Post by Guest 66 »

BartP:

103,0 strings = 16,8 mm
104,0 strings = 15,2 mm
105,0 strings = 13,6 mm
106,0 strings = 12,0 mm
107,0 strings = 10,4 mm
108,0 strings = 8,8 mm
109,0 strings= 7,2 mm

Now we have something to aim for ;)
BartP
Posts: 149
Joined: Wed Apr 23, 2008 9:18 pm
Location: Charleston, SC, USA

Post by BartP »

Touche 66!

I think it also bears mentioning that, as we all know, it is possible (and more probable) that the groups a person shoots are not necessarily in the exact center of the bull each time. For instance, if the wind is gently moving from left to right, I'd be very comfortable with a grouping (about a 10.4-10.5 at 3:30-4 o'clock. If the wind drops off, I might only be looking at a 10.3 at 9:30 or so. Many of my best groups are purposefully NOT in the center so they will not show high string values on the electronic systems when, in fact, most of the bullets followed each other through the same hole. THOSE strings would be extremely tight - prob in the vicinity of a 107+ average. Granted this happens infrequently. More with 5 shot groups than 10. But, to answer BJ's initial query, it is easy to see that some ridiculously tight groups can be obtained.

Disclaimer! :) Obviously, if you are in a Final, you need to treat the situation somewhat differently. You have to know that the freaks at the Unit are sighted in dead center and they are shading if conditions call for it! If you score less than a 104, you will have trouble making ground on anyone. Here, group size means NOTHING. You must KNOW how to hit the center every time.

Bp
BJ
Posts: 64
Joined: Mon May 26, 2008 11:56 am
Location: Raleigh, NC

Post by BJ »

Thanks for all the great information. The break down of group sizes in relations to 10 values really helps a lot. So from this I can basically conclude that as long as my rifle is holding 7.2mm the rest is up to me.

Brian
Guest

Post by Guest »

BartP, the temperature was aprox. 18 celsius, and I would guess that it was the same under the finals,
Ken
BartP
Posts: 149
Joined: Wed Apr 23, 2008 9:18 pm
Location: Charleston, SC, USA

Temperature

Post by BartP »

Hi Ken,

So...it was around 64 degrees. That's still a little on the chilly side for some. I would imagine that the European shooting season is spring and summer like our own and that ammo was tested for those seasons. UNLESS...Do our friends overseas shoot fairly cold matches during winter? And would they have tested ammo specifically for those conditions? Ken?

Bp
Philadelphia
Posts: 170
Joined: Tue Apr 07, 2009 4:52 pm

Re: Best Possible Prone Groups?

Post by Philadelphia »

BJ wrote:I've been shooting NRA prone for 2 years now, achieved my Master classification and I'm wondering what degree of accuracy can humanely be achieved.
Interesting question and something I've also put some thought to (with the disclaimer that I'm a pistol guy but the same concepts apply).

With the gun bolted down properly on a calm day, it will group to its mechanical ability. With the gun in skilled human hands, from a statistical standpoint some groups will be somewhat worse than mechanical accuracy (of course) but some groups will be better. I have found that it is possible to outshoot the gun if enough groups are fired. The real question may be what degree of accuracy can be consistently achieved?

As scores trend toward routinely perfect for the field, is it hard to say what's really being measured on any particular card?
Guest

Post by Guest »

Brian - why not ask the BR guys? I believe ultimate accuracy is what they're all about...

-Mark
sting
Posts: 5
Joined: Mon Mar 16, 2009 3:58 am

Update :-)

Post by sting »

Small update from my training indoor 50m.

600/53

http://docs.google.com/fileview?id=0ByP ... OWE3&hl=da

Cheers, Ken

http://kennethnielsen.blogspot.com
Telecomtodd
Posts: 221
Joined: Thu Feb 14, 2008 12:15 pm
Location: Saint Charles, MO

Post by Telecomtodd »

Very cool PDF, Ken.
Bo_1979

Post by Bo_1979 »

Wow. nice shooting Ken!
I had a quick glimpse of the picture galleries at your site. The angle of your hook looks quite different. Do you use it with contact and pressure against your upper torso, or does it just look that way?

Cheers

Bo
sting
Posts: 5
Joined: Mon Mar 16, 2009 3:58 am

Post by sting »

Bo, yes your rigth - the hook gives stability because of the angle I kant the rifle - looks strange - but it works for me.
Ken
Post Reply