izh 46m breech fires when closing

gfrad · Post by **gfrad** » Thu Dec 03, 2009 7:07 am

after cocking gun and lowering breach gun fires or looses air even when i try to dry fire when closing breech it fires,i have lubed piston and seals with pellgun oil.Is it possible it is trigger settings??if yes how do i reset to factory seetings the original settings have been changed

Misny · Post by **Misny** » Thu Dec 03, 2009 9:45 am

We had a shooter at our match last Saturday that had the same problem. He turned the screw behind the trigger clockwise. That seemed to solve his problem. Check out this site that our host, Pilkington's, provides: http://www.pilkguns.com/tenp/default.htm

paulo · Post by **paulo** » Fri Dec 11, 2009 8:57 pm

I would suggest you adjust screw B on the diagram.
It could be other things, such as need for new seals, or piston seal, EAA still has kits available if that is what is needed.

frog5215 · Post by **frog5215** » Sun Jan 10, 2010 6:34 pm

If not trigger adjustment, there might be a conflict of a trigger/digital simultaneous coexistence in the same locality.