Moderators: pilkguns , Marcus , m1963 , David Levene , Spencer
pfhj
Post
by pfhj Sat Jul 11, 2009 12:27 pm
Some time back there was a contributor that had a 10 meter air rifle target reduced to 5 feet. Can someone guide me to that post or source?
RobStubbs
Posts: 3183 Joined: Mon Mar 01, 2004 1:06 pmLocation: Herts, England, UK
Post
by RobStubbs Sat Jul 11, 2009 12:34 pm
pfhj wrote: Some time back there was a contributor that had a 10 meter air rifle target reduced to 5 feet. Can someone guide me to that post or source?
You can do it on the Scatt software, which is a free download.
Rob.
jhmartin
Posts: 2620 Joined: Mon Nov 29, 2004 2:49 pmLocation: Valencia County, NM USA
Post
by jhmartin Sat Jul 11, 2009 1:06 pm
Rob ... When printing the targets on my pinter, I get an oblong target, not a round one. The border is square, but the target within is not round.
luftskytter as guest
Post
by luftskytter as guest Mon Jul 20, 2009 11:43 am
I simply use a photocopier with zoom.
Bill177
Moderator
Posts: 271 Joined: Tue Mar 02, 2004 9:32 amLocation: Upstate NY
Post
by Bill177 Mon Jul 20, 2009 7:28 pm
Quest1
Post
by Quest1 Tue Jul 21, 2009 7:13 am
When reducing the 10 meter rifle target to 5 meters are the standard scoring plugs useless?
paulo
Posts: 338 Joined: Tue Apr 21, 2009 10:11 pm
Post
by paulo Tue Jul 21, 2009 10:54 am
As mentioned before,
http://www.scatt.com/software.htm , look under tools for Print Target, once you pick the target you need you can enter the distance by typing it yourself or using the preset increments.
