MG1/GP1 grip adjustment

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Guest

MG1/GP1 grip adjustment

Post by Guest »

The manual says to turn the screw on the right side of the frame to vary the angle side-to-side. It doesn't mention the corresponding screw on the left side. Doesn't that have to be turned also?
dhurt

Post by dhurt »

i think the two sides are connected, when you screw one side in, it moves out on the other. This keeps the adjustment centered in the grip. Dwaine
Guest

Post by Guest »

dhurt wrote:i think the two sides are connected, when you screw one side in, it moves out on the other. This keeps the adjustment centered in the grip. Dwaine
Dwaine,

Thanks. That makes sense and explains why only one side is addressed in the manual.
luftskytter
Posts: 106
Joined: Wed Feb 25, 2009 9:50 am
Location: Norway

Post by luftskytter »

That seems to be correct: long time since I adjusted mine, but looking at it only the right hand screw head has a hex hole in it. The left is just flat.
So it can only be adjusted from the right hand side.
Post Reply