TargetTalk

I seemed to have solved the problem that I originally posted about. I unscrewed the piston a 1/4 turn at a time, re-assembled it, then tried it. I repeated this process until I finally got a setting that allowed the pistol to function correctly without any misfires. Thanks everyone for the input, I ...

I have removed parts 17, 9, and 13 cleaning them and lubing them. I put it all back together and then left the grips off and tested the gun. It worked for a couple of times then it failed. What I discovered is that when it malfunctions a little puff of air is pushed back out towards the rear of the ...

kevinweiho - Yes the latch does open all of the way up by itself. I am using RWS Chamber Lube in the little hole for the Main Piston and Tim McMurray MAC 1 Secret Sauce on all of the rubber parts.

Houngan - I am assuming that you are referring to part #9 in the attached photo when you mention the Main Piston. http://i849.photobucket.com/albums/ab60/billspin/Screenshot2012-11-30at20821AM.png C.Perkins - I have been doing almost exactly what you described. Except for opening the bolt up complet...

I purchased a used IZH 46-M and it worked well when I first got it. It started acting up. When I would pump it and get it ready to fire then pull the trigger it would only make a small noise and not move the pellet. I would only lift the lid where the pellet is and try to refire and it would not fir...

Can anyone point me to a manual that I can either download or purchase that will describe the disassembly / assembly steps for replacing the Ejector. I have found instructions for the Slide Insert and the Extractor. I have been having some problems with FTE and would like to replace the Ejector to s...