TargetTalk

Hello Bob The first new 2013 i brought had a Anschutz stainless barrel fitted. This barrel shot very well but was more finicky with ammo and required a lot more cleaning. It came with a very good test group but never quite lived up to that. I have since replaced it with a Anschutz blue selected barr...

Hello all
Can any body tell me what the gasket material and thickness is on the Walther lg300xt alutec. The gasket goes between the action and stock and has a Walther part number of 2646421....

Regards and a Merry Christmas Adrian...

Hello
Anschutz bolts usally have the last 3 numbers of the serial number stamped in the end of the bolt, so you can easily check to see if the proper bolt is in the proper rifle
Regards Adrian

Hello All
I know this is an old post, But can someone tell me when Walther changed from the old gold regulator to the new silver one
Regards Adrian

Hello Gary
I was told the rule was .1mm for every inch added to forsight...
which would give you about 5mm the same as Kenny.
Regards Adrian

The other thing to consider is that the focal length for a pistol lens is set shorter than a rifle lens....
Regards Adrian

Hello Paul When the Anschutz service people were at Bisley a few years back i asked for a new firing pin and also a training pin....They sold me a new firing pin, Then cut about 3mm off a old firing pin and gave it to me. The new pin is 130mm and the training pin 127mm....All you want it to do is no...

A good set of rear sights are from Bedford Target Supplies. His Panaramic sight lets you see all the wind flags you want.....
Adrian...
https://www.bedfordtargetsupplies.co.uk

Also notice that Anschutz have revived the 2002 due to olympic gold...

Hello Langy
The trigger advice is good advice. A shooter from my club had same
problem after he removed his trigger to clean it about a month ago...Moved trigger further to the rear....Problem solved....
Regards Adrian...

Hello I use a RS 2 stock with a 2013 action/barrel and find it very good. When I was thinking of buying the stock I e-mailed Grunig quit a few times with different questions, They replied very quickly and were a great help. I do not see why they cannot supply with a 2007 barrel, It will take a littl...

Hello Jon
File on its way....
Adrian...

Hello All

I have just purchased a nygord turbo-comp, one of the grub screws was missing. Can any body tell me the thread size used on these compensators...........Regards Adrian......