TargetTalk

I have done it with the claws out and in. Results were the same so now I just leave them in.

From Lilja website. This has worked for a few barrels I have done. We offer .043″ Go Gauge made by Pacific Precision. Important.Buy this first Installation instructions for original Anschutz 2007/13 design: anschutz To remove original barrel: Backoff single 3mm set screw on bottom of receiver. Loose...

My personal opinion would be to get the KK500.There is the flexibility to shoot left handed if you need to because of issues with eyes or other issues. I had a bad case of bursitis earlier this year and had to stop shooting for a while but I could probably have carried on left handed.And for resale ...

something like this worked for me https://www.drjeffspencer.com/care-less ... rm-better/

http://www.crowood.com/details.asp?isbn ... ical-Guide

I have not referenced any other books since getting this one.Includes exercises that teach the shooter what happens and why.

I looked at the ISSF prices.Micrometer 380 Euro or US $473.00. For anyone that can speak German are these prices on the Hogetex website wholesale?https://www.hogetex.de/messen/messschra ... ssschraube

I've been kicking around the idea of making a club tabletop target camera with a permanently installed camera and front illumination and a backlight for the targets for use with Targetscan. A clubhouse server that ran the software and gave access to the scans and results through individual apps wou...

Thanks for the replies.I only realised how bad my right eye had got when testing a left hand rifle.

Is anyone using one of these for using left eye and right hand rifle ?The offset sights are too fiddly for different distances.

TenMetrePeter wrote:Slightly more learned info from an American shooting eye doctor!

https://www.ssusa.org/articles/2017/1/2 ... -aperture/

This article clears up many questions I have asked over the years. Recommended reading for older shooters

Thanks.

For calibrating printer does the 9 on solo 10 line up with 1 ring on target for 10.9?

Gerald

Hi Martin and all.
The Nonius guage is exactly what we need.If anyone has one for sale pm me please.

Gerald

Does anyone make an overlay for decimal scoring a 50m finals target?
I have been using targetscan on Iphone but it is a bit slow.

Has anyone tried testing a tuner on more than one different type of test bed with the same settings?
Differing results would mean a rifle tuned on a rig may not perform the same when shot from the shoulder.

20 yard with Starik tuner.10 shots in each hole.My rifle has never grouped like that before i fitted the tuner.

My one used light conveyor belting screwed at the top only and hanging down.
Pellets hit it and fell straight down.
You might also be able to use an old truck rubber mudflap.
I used one of the target return systems with strings and a motor.

Thank you very much. Any hint on adjusting dioptry. It adjust from -4.5 to +4.5 Thanks When I used one of these I opened the iris wide open and then adjusted the focus until I could read fine print at about a foot out from the front sight.Some may have the focal point further out or closer.Then I a...

Martin H wrote: And as another bonus the total weight is the same as my standard Bleiker long bloop tube.


Martin

I have often wondered if one of the things that makes the Blieker shoot so consistently was the fine tuning of the tube to suit the barrel.

Search for adjustable handle.

These fittings are widely available for metal and woodworking machinery.
Aliexpress and similar websites offer free shipping to most countries

Why didnt Anschutz just set the action back like this ?