Search found 7 matches

by canthit
Mon Sep 02, 2013 12:36 pm
Forum: Bullseye Pistol Talk
Topic: GSP Expert Firing Pin Failure
Replies: 10
Views: 3385

GSP Expert

I have the GSP expert and when I dry fire it I use plastic dry wall anchors. I also during practice and in a match fire the extra shot, and do it quite often. In over 2 years firing pin is fine. The only thing I thought about doing was going to higher capacity mags and putting a dry wall anchor in f...
by canthit
Fri Sep 23, 2011 12:07 pm
Forum: Bullseye Pistol Talk
Topic: Clark versus local smith
Replies: 11
Views: 5038

Clark or local

I went through the same problem last year and decided on the local gun smith and I am not sorry. It does not carry the name of a well known person, but is probably as good if not better. The main reason I decided on a local smith was the probability of needing some minor tweeking to get every thing ...
by canthit
Sat Sep 10, 2011 7:06 pm
Forum: Bullseye Pistol Talk
Topic: red dot on 45
Replies: 24
Views: 6080

45 mount slide or frame

One thing you might want to consider on which mount is if you are going to shoot light loads or heavy loads. If all you are shooting is lighter loads the slide mount is fine, recoil from heavy loads can be hard on red dots or scopes mounted on the slide. If shooting all different loads the frame mou...
by canthit
Tue Apr 12, 2011 2:24 pm
Forum: Bullseye Pistol Talk
Topic: Wandering Ultradot
Replies: 17
Views: 7890

dot needing adjusted

JAS I was having the same problem, but it turned out the problem was me. I was changing my grip slightly without knowing I was. This also changed how much finger was on trigger. I quit adjusting red and would shot off rest and found point of impact was the same each time I thought red dot needed adj...
by canthit
Sat Jun 05, 2010 10:24 pm
Forum: Bullseye Pistol Talk
Topic: range commands
Replies: 17
Views: 8359

range commands

Bullseye Pistol Gear has a MP-3 player with timed and rapid fire commands for about $20, Look under training aids. If you have a mic for your computer make your own and down load to your player or use a small tape recorder. I think you should wait about 3 seconds between commands. Hope this helps. c...
by canthit
Sun Jan 03, 2010 11:40 am
Forum: Bullseye Pistol Talk
Topic: 1911 for indoor
Replies: 5
Views: 2518

1911 for indoor

Hi, Thanks for the info. The info helped and I plan to order in a couple weeks.

Thanks again
canthit
by canthit
Thu Dec 31, 2009 2:01 pm
Forum: Bullseye Pistol Talk
Topic: 1911 for indoor
Replies: 5
Views: 2518

1911 for indoor

Hi,
Thinking on having a 9mm bullseye pistol built on a 1911 frame, I have heard of this caliber being used indoors at 50 ft. any comments and loads using cast bullets around 115, 124 or 125 grain would be appreciated.

THANKS
canthit