TargetTalk

So. I have been using CLP Breakfree on my Morini CM22RF. The recoil buffer on this gun got a rubber thingie that keep the bolt from hitting the frame of the gun. After about 150 rounds I can see extensive wear on this rubber. aka "mushroming". Is the CLP Breakfree a rubber solvent? (I have...

What he needs is a cylindrical correction. Just a question how does he know it's astigmatism that is causing his problems? Got the same problem. I found a good optician, providing med with shootingglasses from http://www.knobloch-schiessbrillen.de/allframes.html tuned to focus on the front sight. A...

CM 32 is still on the market.

White Rabbit, is it possible for you to post a photo of the extractor? My cases lack that "bulging".... might be a rough edge in your barrel, perhaps in combination with a worn extractor?? Considering the shells actually doesn´t eject it´s quite possible it is the extractor that is not fun...

I know the answer to this one: I called www.interprodukter.se regarding exactly this problem. ( 1 case in 50 failed to eject) And this is what I was told: There is a known issue with the hardening of the extractor. (to soft) This should be replaced for free. I changed mine yesterday and the old one ...

Gort wrote:Toby, Just 30+ years as a tool&die maker, Gort

:)
I really appreciate people with a sense of details!

To be a little more precise and not too much involved in the discussion, the serial number of the pistols we are assembling now are 00250-A and up. Ok! Do you by any chance have the prefered torquevalue for the main bolt holding the "trigger housing" #022018 ?? Some users report this come...

Gort wrote:The screw on my CM22-RF is a Torx with a 82 degree conical head, precluding the use of a washer. Proper torque of the screw will fix the problem. Morini should provide the torque spec for the screw.
Gort

Neeeeeeerd!! :)

I had to tighten again that bold one time on my CM22M RF after about 1000 shots, the first 1000 shots. But I do not know how tight the bold was: it was factory (or reseller) tightened since, shame on me, I didn't cleaned nor dismount the pistol till it happened. Since then, it didn't happen again. ...

Also a owner of a quite new Morini CM22RF. Have not encuntered this problem.

- -a bit to light without the weights. (900 grams) (1060 with weights) - weights must be removed in order to dismantle the pistol. Dismantle? Completely, you say? For routine cleaning I think you just have to loosen the bolt holding the main frame and the upper frame/barrel assembly fixed? (And rem...

OT: "Moriniowner" is now registred as "Renback" which is my surname.
Firstname is "Toby"