TargetTalk

Thanks Bob, i'll start reading your material! Yes, i know Ruig's work, my biggest problem is to find the solenoid, Steyr didn't sell separated from the trigger. My intention with Toz is only to have a electronic firing pin release, not to strike directly the rim, but it's interesting your way becaus...

Hi Bob, i'm interested in circuit board. I wish to put an electronic trigger to my toz, to release firing ping need 650 grams of force, how function on Walther? solenoid directly strike cartridge or simply release the firing pin? Please how many batteries are requested by circuit, and do you have ac...

It's homemade by me, but inspired from Morini trigger blade for long finger.

Thanks Ken4all, good Fimo advice! Works Great!
Gave it a test today, here the result. Nice feeling and cheap, grip not suffered from 110° exposure, fimo hardened as wood.
.

I own a steyr lp10, tested with and without the conic element of the compensator (so compensator port unactive), clearly feel and see the difference of the muzzle flip.

I've seen a few posts mentioning muzzle flip, recoil, etc. on the CM162ei... and I thought all of it was true until I trained a little more/better. No movement at all when my technique is perfect - once in a while, of course. I think it's more of a symptom of bad technique rather than its inherent ...

I just hang the complete grip with a metal coathanger in the oven at 110°C for 30 minutes. It's only after cooling that it hardens, so take it out the oven and hang it somewhere to cool down. Works great. Thank you very much, i'll give it a try. how about finger feeling? how is the surface when it ...

ken4all wrote:, available in all colors, even different shades of brown.
I'm using it for the moment to change my free pistol grip.

How do you make changing to hard? became hard as classic wood putty? attached to the grip at 110*C?

Replacement blade trigger or entire mechanism?
First answer go for homemade, second answer buy a time machine and back to USSR!
LukeP.

.34" groups are outstanding! is like 8mm at 50 meters, really?
Good job!

As test, attending the new spring replacement: I stretched the magazine's spring, twice and half the magazine lenght, to obtain more power, and definitely pistol doesn't jam anymore. Spring were soften by use, now they are a lot harder. But, i try also to make a new magazine catch; i noticed a littl...

Thanks gfrad,
i'll mail soon wolff.

coorect both from wolf spring Here the reply from wolff spring, for sure i'll mail the dimension as they are very gentle but they didn't have stock items as you wrote... ""Thank you for writing and for your inquiry. Sorry but we do not have any springs for the Izh 35 pistol at all and we ...

I prefer less curved trigger like it is on Morini 162 or old Steyrs. From day one I did not like the curved one I got on LP 10 and after trying Morini 162, I ordered the old Steyr’s one (10,43 € + shipping) . However, even than one could be straighter and slightly narrow. I guess the straight trigg...

Hi Scrench, just my 0,02cents, imho, you are too novice to the sports to appreciate any differents between pistol. Baikal 46m is first class target pistol plenty capable of scoring 570 and up. I think you must train with the same pistol at least as you reach 540-550 level, then maybe you can think a...

gfrad wrote:I changed my magazine spring and recoil spring( wolf springs ) and had no jams since than

Both of them from Wolf?

Thanks to all folks! First to Carlos: checked magazine lips same measure as yours. Made a new elevator pad (made of derlin) with more upright angle to push 1st and 2nd bullet nose, little adjustment needed to feed the 5th cartridge, but function well. I'll detail with pics when i'll make the second ...

Thanks to all, two magazines developed the same malfunction (i haven't other magazine to test because here in Italy this pistol is not diffused). Magazines not dropped, start malfunction rarely in 100 rounds, and every series on the next 100 rounds. -> the bullet is feeding to low ( jams below the c...

Thanks Makris,
magazine clamped in vice, slammed twice pad come out.
I'll try to reshape the elevator pad with a new piece of derlin to change bullet nose angle and support.

I'm not able to dissassemble the bottom pad, i pushed out the ping but bottom doesn't came out.