Search found 7 matches

by Gravy
Thu Oct 17, 2024 1:30 pm
Forum: Bullseye Pistol Talk
Topic: Is it likely that a .32 S&W long wadcutter can be reloaded on a progressive?
Replies: 51
Views: 158653

Re: Is it likely that a .32 S&W long wadcutter can be reloaded on a progressive?

Re RMCA: Gravy, what velocity are you getting from your loads? I use H&N 98 gr HBWC with 1.4gr VV N310 and get around 720fps. [/u][/i] Sorry man, I don't get out to the forum often. My velocities are: SL - 98 gr Lapua HBWC over 1.42 BE ~ 670 fps (BTW, not enough umps for cold weather - have to ...
by Gravy
Tue Oct 15, 2024 9:47 am
Forum: Bullseye Pistol Talk
Topic: Is it likely that a .32 S&W long wadcutter can be reloaded on a progressive?
Replies: 51
Views: 158653

Re: Is it likely that a .32 S&W long wadcutter can be reloaded on a progressive?

I load 32 S&W long loads with a progressive reloader in a 2-stage process for a Pardini with a Dave Wilson barrel that holds X-ring from a Ransom Rest at 50 yards with my loads. I have tried many of the suggestions in this thread and all over this and other forums to get accurate/consistent powd...
by Gravy
Sat Aug 05, 2023 11:15 pm
Forum: Bullseye Pistol Talk
Topic: Yet another cleaning thread
Replies: 27
Views: 44409

Re: Yet another cleaning thread

I cannot attest to the best cleaning method; but, I can share my process and the results of it. I shoot a 2018 Pardini SPBE and disassemble it and clean it after most shoots (e.g., 90 rounds) with 2 patches - a few passes from a patch damp with Hopps #9 and then follow with a few passes from a dry p...
by Gravy
Fri Dec 16, 2022 1:44 pm
Forum: Olympic Pistol
Topic: Pardini SP BE Keyholed at 50'
Replies: 5
Views: 2306

Re: Pardini SP BE Keyholed at 50'

GWhite - thanks for your experience and i agree with you.

mark
by Gravy
Fri Dec 16, 2022 1:43 pm
Forum: Olympic Pistol
Topic: Pardini SP BE Keyholed at 50'
Replies: 5
Views: 2306

Re: Pardini SP BE Keyholed at 50'

FC60 - Nice to hear from you Dave. Always appreciate your insight. The crown on this gun is fine. And, it was holding X-Ring at 50 yards this fall with TenX and Midas from a RR. CCI std was all but one of the 10 shots in the X-Ring. I am chalking this keyhole up to a bad CCI round. BTW, I have one o...
by Gravy
Fri Dec 16, 2022 11:40 am
Forum: Olympic Pistol
Topic: Pardini SP BE Keyholed at 50'
Replies: 5
Views: 2306

Pardini SP BE Keyholed at 50'

Anyone ever experience keyholing at 50' with a Pardini SP BE? Durning the indoor Winter League last evening with my Pardini SP BE 5", all 10 slow fire shots were in the black and on call except for one which keyholed ~ 4+" low. The other 50 shots were all on call. I bought the gun new in 2...
by Gravy
Sat Aug 06, 2022 11:20 pm
Forum: Bullseye Pistol Talk
Topic: Pardini SPBE .32 S&W failure to feed problem
Replies: 13
Views: 20856

Re: Pardini SPBE .32 S&W failure to feed problem

I have been having this exact problem for about 4 weeks. I have done extensive trouble shooting with clips, crimps (changing bullets (H&N, Lapua, & Meister), bullet seating depth, amount of crimp, and taper vs rolled). Normally, this is my favorite centerfire pistol. It just shoots on call a...