TargetTalk

Thanks for the tip and link! also Pardini called back and said same thing. read the link enough to get trigger to function today with a slight sear adjustment. previous shooter was a competition shooter who knew the pistol inside and out but it did not work for me. was able to get through a magazine...

"If it is the hammer following the slide forward then you probably need to increase the sear engagement (if it is this I'm surprised you haven't gone full auto). " thats what it was doing not the second thing I think your right with the hammer follow and thanks!! actual it did go FA once f...

Pardini is back to bad functioning again, just my luck. Replaced recoil spring and installed new buffer, old buffer was shredded in pieces with only center guide section intact to protect receiver and recoil spring was a bunch shorter than the new replacement. firing pin not broken and rounds seat i...

thanks for the tips!!! ended up taking it apart completely, cleaning chamber and re-lubing with rem oil in bolt cavity and bolt lightly, checked firing pin (AOK) spring and spring guide (straight), lots of dry spent residue powder in receiver and dirt or dust in the grip cavity went back to the rang...

Picked up a used Pardini SPE and took it to the range today for the first time. Accuracy was great but function was a bit poor. After inserting loaded mag and charging the action, the first round goes bang but the second or third does not always. I have to re-cock the action ejecting the live round ...