Greetings,
I was about your age when I started shooting competitively.
Two years later, I earned the 1979 National Collegiate Pistol Title at Camp Perry.
I did have an excellent coach.
Cheers,
Dave
Search found 621 matches
- Mon Jun 17, 2024 7:17 pm
- Forum: Olympic Pistol
- Topic: Am I too old?
- Replies: 18
- Views: 962
- Wed May 29, 2024 7:26 pm
- Forum: Olympic Pistol
- Topic: Scuba tank setup for air pistol cylinder refills
- Replies: 21
- Views: 1674
Re: Scuba tank setup for air pistol cylinder refills
Greetings, Since the tank will be static, no diving and carrying it around, consider a 100 CFT tank. They can be filled to 3300 PSI and you will get a lot of fillings. Also, look into a used tank at the local dive shop. Just be sure it has been Hydro tested recently; or, have it done at purchase tim...
- Wed May 29, 2024 4:51 pm
- Forum: Buy, Sell, Trade
- Topic: Smith and Wesson model 41-1. Parts
- Replies: 5
- Views: 830
Re: Smith and Wesson model 41-1. Parts
Greetings,
I have slide stops.
Check your PM.
Cheers,
Dave
I have slide stops.
Check your PM.
Cheers,
Dave
- Tue Apr 30, 2024 3:45 pm
- Forum: Olympic Pistol
- Topic: Android App for 25M Standard/Sport Pistol (and others?)
- Replies: 9
- Views: 1027
Re: Android App for 25M Standard/Sport Pistol (and others?)
Greetings,elbthesurfer wrote: ↑Tue Apr 30, 2024 2:39 pm 25m Pistol Timer works great for Android. You can customize the course of fire
Sounds great!!!
Perhaps a link to this "app"?
Cheers,
Dave
- Wed Apr 10, 2024 11:22 am
- Forum: Olympic Pistol
- Topic: Anyone still using CO2 match pistols
- Replies: 32
- Views: 22313
Re: Anyone still using CO2 match pistols
Greetings, A little Google Translate for those like me... "In my family we own a FW C20 and another Steyr LP1, both in CO2, they are wonderful how they work and without failures, both on a test bench, they make a single hole with H&N pellets, I do not change them for compressed air ones, Th...
- Fri Apr 05, 2024 10:53 am
- Forum: Olympic Pistol
- Topic: Attention IZH-35M Owners
- Replies: 0
- Views: 1631
Attention IZH-35M Owners
Greetings,
I need some dimensions to reverse engineer a recoil spring for the "IVAN" 22lr. (IZH-35M)
Free Length =
Number of coils =
Outside Diameter =
I need dimensions from a NEW spring.
Cheers,
David
I need some dimensions to reverse engineer a recoil spring for the "IVAN" 22lr. (IZH-35M)
Free Length =
Number of coils =
Outside Diameter =
I need dimensions from a NEW spring.
Cheers,
David
- Mon Apr 01, 2024 2:36 pm
- Forum: Olympic Pistol
- Topic: Old vs new Pardini
- Replies: 8
- Views: 2166
Re: Old vs new Pardini
Greetings, Accuracy with both the old and new Pardini barrels is roughly the same. The older barrels are not fully heat treated , about 80 HRB, and the chambers tend to erode due to the abrasive material in the priming compound. The latest Pardini Barrels I have seen and have tested are hardened to ...
- Mon Apr 01, 2024 10:35 am
- Forum: Olympic Pistol
- Topic: Old vs new Pardini
- Replies: 8
- Views: 2166
Re: Old vs new Pardini
Greetings,
Check with your Pardini parts supplier.
Pardini does not offer parts for some of the older models.
Cheers,
Dave
Check with your Pardini parts supplier.
Pardini does not offer parts for some of the older models.
Cheers,
Dave
- Fri Mar 22, 2024 7:19 pm
- Forum: Bullseye Pistol Talk
- Topic: IZH-35M recoil spring
- Replies: 10
- Views: 4224
Re: IZH-35M recoil spring
Greetings, Based on memory, the Walther KSP200 was a copy of the IZH-35M. https://carl-walther.com/uploads/media/partsdrawings/KSP200_2647206_c.pdf Some parts are still available from Germany. https://schiesssport-billharz.eu/KSP https://schiesssport-billharz.eu/2644207-Vorholfeder Judith is nice to...
- Thu Feb 08, 2024 8:08 pm
- Forum: Olympic Pistol
- Topic: Anyone still using CO2 match pistols
- Replies: 32
- Views: 22313
Re: Anyone still using CO2 match pistols
Greetings, @porkchop I do not shoot as much and my SCUBA tank needed a Hydro test and I did not want to spend the money. With CO2, the pressure is constant as long as there is liquid in the cylinder. Yes, temperature will cause the pressure in the pistol to vary; but, I shoot indoors and the tempera...
- Thu Feb 08, 2024 5:44 pm
- Forum: Olympic Pistol
- Topic: Anyone still using CO2 match pistols
- Replies: 32
- Views: 22313
Re: Anyone still using CO2 match pistols
Greetings, I recently sold my PCP Air Pistol and went to the CO2 powered Walther CPM-1. It came with a 20# Fire Extinguisher and you get a lot of refills per tank. When it is empty, just return it to the shop for a new one. No Hydro nor Annual inspections... The pellet velocity is the same with CO2 ...
- Fri Feb 02, 2024 12:08 pm
- Forum: Olympic Pistol
- Topic: FAS SP602 Parts?
- Replies: 11
- Views: 2282
Re: FAS SP602 Parts?
Greetings,
Music Wire is already hardened.
Once you bend the spring to shape, stress relieve it in the oven at 450 degrees F for 30 minutes.
I have lots of Music Wire. I can send you some short pieces via USPS if needed.
Cheers,
Dave
Music Wire is already hardened.
Once you bend the spring to shape, stress relieve it in the oven at 450 degrees F for 30 minutes.
I have lots of Music Wire. I can send you some short pieces via USPS if needed.
Cheers,
Dave
- Thu Feb 01, 2024 11:48 am
- Forum: Olympic Pistol
- Topic: FAS SP602 Parts?
- Replies: 11
- Views: 2282
Re: FAS SP602 Parts?
Greetings,
Check with Neal Stepp at ISS in Texas.
He had a lot of spares for the FAS.
Might get lucky.
Cheers,
David
Check with Neal Stepp at ISS in Texas.
He had a lot of spares for the FAS.
Might get lucky.
Cheers,
David
- Wed Jan 24, 2024 8:12 pm
- Forum: Olympic Pistol
- Topic: SAM10 Repair
- Replies: 6
- Views: 1028
- Tue Jan 23, 2024 3:12 pm
- Forum: Olympic Pistol
- Topic: SAM10 Repair
- Replies: 6
- Views: 1028
Re: SAM10 Repair
Greetings,
A fellow shooter in Greece came to the rescue!!!
http://www.airgunsitaly.it/viewtopic.php?t=51487
YES, you have to join the forum.
However, this is the first forum I have joined that translates into English as I am Italian poor.
Cheers,
David
A fellow shooter in Greece came to the rescue!!!
http://www.airgunsitaly.it/viewtopic.php?t=51487
YES, you have to join the forum.
However, this is the first forum I have joined that translates into English as I am Italian poor.
Cheers,
David
- Sat Jan 20, 2024 1:58 pm
- Forum: Olympic Pistol
- Topic: SAM10 Repair
- Replies: 6
- Views: 1028
SAM10 Repair
Greetings,
I would like to have an off line discussion with anyone who successfully took apart a SAM10 and re-assembled it to working condition.
Cheers,
Dave
I would like to have an off line discussion with anyone who successfully took apart a SAM10 and re-assembled it to working condition.
Cheers,
Dave
- Sun Jan 14, 2024 1:54 pm
- Forum: Olympic Rifle - Air and Smallbore
- Topic: Marlin Target Rifle
- Replies: 3
- Views: 2618
Marlin Target Rifle
Greetings,
Did not Marlin offer a Target Rifle in 22lr?
If yes, what was the model number?
Did it have the Micro-groove rifling?
Cheers,
Dave
Did not Marlin offer a Target Rifle in 22lr?
If yes, what was the model number?
Did it have the Micro-groove rifling?
Cheers,
Dave
- Tue Dec 26, 2023 5:38 pm
- Forum: Olympic Pistol
- Topic: Air Pistol selection
- Replies: 20
- Views: 45403
Re: Air Pistol selection
Greetings, I recently came into possession of a Walther CPM-1. The CO2 cylinders are mounted in a vertical position close to the trigger. This moves the center of gravity more rearward. Also, you can unscrew the rod for the adjustable weights and leave it in your shooting box. It is still CO2 and pa...
- Tue Dec 26, 2023 11:30 am
- Forum: Olympic Pistol
- Topic: SAM10 O-Rings
- Replies: 3
- Views: 7664
SAM10 O-Rings
Greetings,
Does anyone have a list of the O-Rings used in the SAM10 air pistol?
Any information is welcome. Metric size, material used, and a reference to the SAM10 part numbers.
Cheers,
David
Does anyone have a list of the O-Rings used in the SAM10 air pistol?
Any information is welcome. Metric size, material used, and a reference to the SAM10 part numbers.
Cheers,
David
- Mon Dec 25, 2023 8:20 pm
- Forum: Olympic Pistol
- Topic: Secret Decoder for Walther "CP2 Match" Parts?
- Replies: 4
- Views: 11894
Re: Secret Decoder for Walther "CP2 Match" Parts?
Greetings,
Judith Billharz has many Walther parts.
https://schiesssport-billharz.eu/CP-2-W ... 0-13250_s1
They are listed by the Walther part number.
I thought I saw the link there; but, now I cannot find it.
Cheers,
Dave
Judith Billharz has many Walther parts.
https://schiesssport-billharz.eu/CP-2-W ... 0-13250_s1
They are listed by the Walther part number.
I thought I saw the link there; but, now I cannot find it.
Cheers,
Dave