TargetTalk

I seem to remember a post on this topic but I have searched the forum with no result so please excuse this post if it is a repeat of another.
I am not overly happy with the shape of the trigger blade on my Toz 35 and I am wondering what others have used as an alternative. Cheers.

Took the left hand side grip off and can see the firing pin move all the way back. I'm wondering if the grip is interfering with the lever under the grip moving far enough back to cock the pistol. Will experiment with this as it is cocking ok with the grip off now. Thanks for pointing that out.

I have had the grip on and off my Toz a number of times to remove a bit of wood and now it will only cock and fire in what seems to be dry fire mode i.e. light strike/click. I have the same issue with the grip on or off. I have tried everything and it will fire with a heavy strike occasionally but m...

Oldnslow wrote: ↑Mon Nov 11, 2024 7:45 pm The spare (unused) firing pin spring that came with my Toz 35m is 27.5mm long.

Thanks Oldnslow, that's exactly what I needed to know. Mine has shrunk then, the pistol was probably stored with the spring under pressure by a previous owner.
Cheers

Does anyone know the length of the firing pin spring in the Toz 35 when new? I have had a couple of light strikes so I have dissembled the firing spring assembly and cleaned everything. I measured the spring and it is 26mm but I dont know the correct length. Just wondering if has compressed a bit an...

I’ve had an eye test and a new lens fitted just recently but no better. The fact that non-illuminated targets are crystal clear makes me think it isn’t a lens issue?

I have been having difficulty getting a clear sight picture on the air pistol range. When I hold on the blank wall just above the target, my sites are perfectly clear. However, when I lower the pistol onto the illuminated target, I get slight blurring of both rear and forward sites making my hold a ...

Thanks for the comments. I decided to purchase the Kowa as it is so much cheaper than the NG and more powerful magnification for my older eyes.

Has anyone used the NG 30x50 spotting scope for 50m pistol? I have the smaller 20x33 which is great for 20m events but I am struggling to see the holes in the black at 50m and wondered if the 30x will make an appreciable difference? TIA

I currently only have the Front Sight Holder which came with the pistol on my CM84E but have been wondering if I should purchase a compensator for less recoil and better follow through. I see there are 2 after-market versions on the Buinger website (Normal & Long compensators) and I wondered if ...

I picked up a used 2 stage trigger cheap to try in my CM84E but the first stage is very long and I cannot work out how to adjust this. It didn't come with any adjustment instructions and I have searched all over the web but cannot find anything. Can anyone point me in the right direction?

Does anyone know if there is a replacement metal trigger carrier (part 55.1) available yet? I understand there is but I have searched all over the web and forums with no luck. I'm not a fan of the plastic one that came on the pistol as it can bend with the trigger blade mounted well forward.
Thanks

I am now considering the purchase of the LP400 mainly due to chronic tennis elbow and the weight difference between this pistol and my Morini 162EI. Some time ago when I was not in the market I picked one up with a medium grip and I remember being surprised at how small (thin) the grip felt. Can any...

I would like to scope my Morini 162 for silhouette, does anyone know where I could by a mount? A barrel clamp mount would be ideal but not sure if anyone makes them?
Thanks

Thanks for the replies, I have successfully ordered one! I wonder if it comes with a guarantee to add 50 points to my score.......?
Appreciate the help.

I have been trying to order a Centra Toz Balance but they only seem to be available in the UK or Germany and the suppliers I have tried wont ship outside the EU. Does anyone know of a supplier of this product who will ship to the rest of the world as I can't seem to find one?
Thanks

I really enjoy this forum but would like to know if there are additional pistol forums out there that focus on ISSF? I found a Yahoo forum for Free Pistol but it isn't very active. I am keen to improve my shooting so would like to read as much as possible.
Thanks

That's perfect! Many thanks

Does anyone have a link to a downloadable free pistol target that can be shot at 25 mtrs? I guess it will be 50% of the size of a standard pistol target?
Many thanks

My compensator (new style) is an absolute pain to get off. It is so tight I have to get my son to hold the pistol while I wrestle with the compensator. It's a good 15 minute job! Are yours really that easy to get off? Wonder what the problem is with mine??