TargetTalk

I’m thinking of purchasing a High Standard .22 pistol. My question, it appears that Interarms carries parts, magazines that would keep the pistol running as needed; is my assumption correct?

If not, I would then lean toward a Hammerli Xesse...

Thoughts please.

Thank you,

Ted P

I’m wanting advice on a 41 vs Victor. Of course the concern with Victor is parts etc. I’m assuming there are gunsmiths that can work on either..... Thoughts are appreciated!

Thank you,

Ted P

GWhite

Thank you!

Looking for contact information with Matchguns USA.
Anyone have contact info?

Thank you,

Ted Pearson

Just last week, I had the stiff cocking lever occur in my like new 162 Titanium...I called our host and was told to put a little Moly grease on the pin and slot area.

Haven’t shot it much since I put in the Moly grease..I’ll provide an update in the next day or two.

TP

Anybody living in Indianapolis area own a Morini 162ei? I’m interested in just seeing one.

TedP

I’m interested in feedback from those that own an 84e and a 162ei! My question, is a medium from one pistol the same fitting size and volume the same as the other pistol? Reason I ask, I have a Morini 84e with a small grip and it fits very well. I have a Pardini K12 with and small and it doesn’t hav...

I’m needing a medium grip for a used K12. It came with a small grip which fits ok with exception of the palm shelf which is too short from front to back. It’s to short to support the heel. The small grip on my Morini 84E fits perfect and the volume is thicker than the medium rink grip on my Benelli....

Corrected it ...thank you!

In getting back into Free Pistol/Air Pistol pistol shooting, I was wondering what type/brand stand you use for your spotting scope?

Thank you,

Ted P

Finally heard back from a Pardini today and each cylinder needed new seals. Apparently the gentleman that had it before me let the pistol sit for a while and never put silicone lubricant on the seals. Inexpensive fix!

Happy Holidays!

Ted

Thank you for replies gentlemen! I’ll leave “well enough alone”.

Take care!

Thank you for your reply! I’d prefer not to buy the longer barrel as it’s a $382.29 cost for just the barrel. I was hoping for a cheaper option.

Take care!

I’m looking to see if it’s possible to purchase an extended front site for my Pardini K12Junior. I’d like to add an inch to make it similar to a Toz35 sight radius(difference is 1”). I doubt there is one to drop in but thought it might be possible to doctor one up.

Any thoughts?

Thank you,

Ted P

Thank you all for your kind replies!! I called Pardini and they suspect both cylinders need new seals. So, I sent the whole pistol kit in to have them inspect and repair. I’ll keep you posted!

Thank you again,

Ted

I’ll call Pardini...however, does anyone know if the K10 and K12 fill adapters are the same?

Thank you,

Ted

Spektr, thank you for your reply! I tried your suggestion on both cylinders and they still won’t allow air in.

Any further suggestions?

Thank you,

Ted P

I recently purchased a used Pardini K12 Junior in what appears to be excellent condition. The problem is neither cylinder holds air as both are allowing air to release right back thru the filler port as if a valve is stuck. Anyone have this problem or any ideas how to correct the problem. Thank you,...

Thank you gentlemen! The 4’-7” seems correct for 10 meters.

Getting back into pistol shooting and need a new a spotting scope. Are there any that would focus down to 25’ but still resolve.22 at 50 yds.?

Thank you,

Ted P