TargetTalk

Update: The Villages Air Gun Showcase, March 28-29, 2020, to be held in Central Florida is rapidly approaching and there is still plenty of time to make your plans to attend. We have obtained commitments from several prominent manufacturers and distributors to attend the Showcase, among them are: Be...

I am shooting an Anschutz 8002 S2 compressed air rifle. Today, midway through a 10 bull target, I produced an underpowered shot that hit nearly 3" below my point of aim. I immediately checked the air cylinder and discovered that it had come loose a couple of turns. I re-tightened the cylinder a...

While at the 10m range last Friday I noticed that the trigger blade on the pistol was very loose and off center. I proceeded to reposition the trigger and use the correct allen wrench to tighten the screw (identified in the manual as screw "a"). I made no other adjustments and touched no o...

While at the 10m range last Friday I noticed that the trigger blade on the pistol was very loose and off center. I proceeded to reposition the trigger and use the correct allen wrench to tighten the screw (identified in the manual as screw "a"). I made no other adjustments and touched no o...

Scott,
Thanks for your sage advice re: air cylinders.

Vince

BigAl, Thanks for your reply and information. Do you know whether FEDEX, DHL and UPS have the same restrictions? The reason for my question: My local dive shop has identified a source to inspect, rebuild, hydro and recertify air cylinders. These cylinders would not necessarily be used in sanctioned ...

David, thanks for the information.

Can anyone tell me what the requirements may be to ship empty compressed air cylinders from Europe to the USA? I'm talking about those used with .177 PCP pistols and rifles. Thank you,

pardoctor

Does anyone know whether the PCP cylinders for the P34 and P40 are interchangeable with the P30?

Thank you,

Vince

Can anyone advise me as to the correct intermount to use to attach a red dot to an FWB P30? Thanks,

Vince