TargetTalk

The case eject issue may not be related to the bullets. I was having that issue and was told by Pardini to put the .22 magazine spring in the HP magazines. This fixed that problem on my bulleseye edition. I'm currently shooting hornady 60gr, .895 aol, .330 tapper, 1.8gr NN310 I have some Rimrock .31...

Greetings Oldcaster, I just purchased another 2000 rounds of H&N .314 HBWC bullets from Cibles Canada Targets. The price per round including shipping came out to about 15 cents each. I think it's time for me to learn how to cast these. I would like to take you up on your offer to try out the one...

Thank you all who replied to my post. Since I had already tried the crimp I got out my chronograph and discovered the loads I was having problems with averaged 765fps. I looked up my test data from before and the loads were 734fps. So I suspect my electronic scale was off a bit this last batch and I...

Thanks for suggestions. I measured the velocity of my current batch of reloads and found them to be 765 ft/sec where my last batch was about 735. A good chance my loads were a bit too hot compared to last batch. Wondering now if I was actually dropping 1.6 of N310. Vladimir returned my call and we t...

Greetings, I'm having failure to feed with my .32 S&W conversion on the Pardini SPBE edition gun. 95% of time it is last round but sometime happens second or third round. The failure is the tip of the round hits top of barrel chamber and rim of round is still in the magaznie lips. Frequency is a...

I have the SPBE and have a .32S&W conversion. I like my pistol heavy so I ended up with 4 tungston on top and 2 steel on bottom. I put the springs on the face plate side for just the middle weights and all others on the rear. This has been my favorite combination so far for .32S&W. The load ...