Search found 6 matches

by 3P-Walther
Thu Apr 24, 2014 6:12 pm
Forum: Olympic Rifle - Air and Smallbore
Topic: Scope question
Replies: 19
Views: 2893

scope specifications

Hi Nemo What sort of specifications are you needing? Most 4x scopes have very similar specs. There are variations in % light transmission, but those are mostly numbers games for the sales people. The human eye has a hard time seeing light transmission differences that are less than 10% difference (i...
by 3P-Walther
Wed Apr 23, 2014 9:43 pm
Forum: Olympic Rifle - Air and Smallbore
Topic: Scope question
Replies: 19
Views: 2893

4x Scope for 10m airgun

In regard to Nemo's question about a 4x scope to shoot airgun at 10m, I have to assume that it will be on a pneumatic gun, not spring. There are a number of good quality scopes that can be set to 10m parallax. Such a scope should have the objective lens in a threaded mount screwed into the objective...
by 3P-Walther
Sat Mar 16, 2013 1:50 pm
Forum: Olympic Rifle - Air and Smallbore
Topic: Walther LGR Match questions
Replies: 4
Views: 1606

The breech block should not leak. If it does, you should expect some velocity variations shot to shot - not good for groups. I have never had to replace the seals on the breech block. I leave it open whenever the rifle will not be used immediately, between matches, storage, transport, etc, to avoid ...
by 3P-Walther
Tue Mar 12, 2013 12:32 pm
Forum: Olympic Rifle - Air and Smallbore
Topic: Air Rifle Advice
Replies: 6
Views: 1899

Walther LGR is hard to beat. It has the actual barrel mounted ahead of the air cylinder, so follow through is really critical, but if you can hold it still as you break the shot it will shoot 10's all day. Many world records set by it when it first appeared. The trigger is fully adjustable and reall...
by 3P-Walther
Tue Mar 12, 2013 12:25 pm
Forum: Olympic Rifle - Air and Smallbore
Topic: Walther LGR Match questions
Replies: 4
Views: 1606

LGR seal life

My LGR was a 1982 model. It had the larger (Anschutz-size inserts) front sight and the angled rear sight with large knobs. The angled bottom corner of the rear sight housed the spring plunger to maintain tube tension against the adjusters. I replaced the seal about 2 years ago, and have not replaced...
by 3P-Walther
Sun Mar 03, 2013 7:02 pm
Forum: Olympic Rifle - Air and Smallbore
Topic: Eye problem? Rear peep changes diameter.
Replies: 12
Views: 2626

Iris stopping up and down when looking through the sight

I believe ShootingSight is correct. The eyes work together and try to have same-size pupils. In indoor shooting, the light is usually dimmer than outdoor, so the pupils are large to start with. When you look through the sight you will see the aiming eye change in response to the non-aiming eye being...