TargetTalk

Well there is no hole in the trigger guard, again it's not a 208s. J, thanks for the info. Having gotten no response from Larry I went ahead and adjusted a few of the screws to include the red one and after a bit of messing around I ended up getting it down to just over 2 lbs. I'd prefer to have Lar...

I would do that, but I've called and emailed Larry and gotten no response. I'm sure he's busy these days so I'm not upset, but since I have two weeks of shooting coming up in Arizona I wanted to get it adjusted before heading down there.

I thought that might be what it did but I wasn't sure. None of the manuals online describe it. So the question is what's the correct location for the screw since mine is in the CF setting? I assume yours is correct, if you don't mind me asking what location is it in?

Thanks but that's for the later model 208s. I wish I had that trigger group!

thanks. I looked at that previously and unfortunately it has the same generic info from the manual. No discussion or description of that screw or diagnosing trigger issues.

Hi all, I had previously posted on the Hammerli 208 International that I had picked up recently. Well I've been traveling so I'm just now having some time to work with it. One of the things I noticed is that the trigger was just over 3 lbs, around 3.25. Since I plan on using this for Bullseye and IS...

what issues were you having with the gt45 and your suspected undersizing?

That's great, thanks for the info. I'll give it a try and see what happens. Anyone else have any thoughts?

Hi all, Been doing some research on finding a good 50 yard load for my GT45. The only one I've found is 4.7 gr of VV310 with a Nosler 185. I've heard the GT45s like jacketed bullets pushed fast, anybody have a different opinion? I also have a ton of WST and 231 so any loads using those powders would...

I took the screw out and it turns out the inner screw was missing, there was a small piece of metal (?) holding in the spring and detent. Ended up getting a whole new screw setup and saved the old one for spares. Got the trigger to 3.5 lbs now and it still feels great. I emailed Pardini a couple of ...

http://farm9.staticflickr.com/8061/8189662360_125ddfc2f1.jpg It's tough to see, but the adjustment screw I'm talking about is on the left. If you look closely you can see a rod going across the inside of the screw, where the inner screw is supposed to be. I can't see any way to adjust it. I also lo...

Thanks for the info. It looks like there is a bar across the inner screw so I guess I'll have to look closer when I get home at it. The manual gives no info on the right size, although pardini did get back and say they thought it was a 1.5mm. Not sure I have that one in the collection, we will see. ...

Hi all, Long time lurker, first time poster. I just picked up a used Pardini GT45 to try for the CF and .45 stages. It's got a fantastic trigger, the problem is its too good right now. It's at about 2lbs and I want to get it to 3.5. From looking at the manual I need to adjust the second stage inner ...