TargetTalk

Do you know if this app would work on a nokia 5800 XpressMusic ?

I need an ap that will allow me to dry fire at home in the times needed for the disipline.

I shoot Centrefire Pistol Standard Pistol and Rapid Fire pistol and dry fire at home. Does any one know of a device with a timer for the start and stop red and green lights so I can train at home. I have seen a good application for the iphone called ISSF Trainer. Does any one know of a similar app f...

Hi Scausi, Well after cleaning up all the bits it now seems to be much better and feels much more constant. I still have to shoot some more with it and also get used to the new settings. I have now set the first stage a bit harder so to have a lighter second stage. Trigger is not completely broke. T...

Hiya, Check with Earl at Earl's repair service, (www.carlwalther.com) I have a brass trigger on my GSP, It was "vague" like yours, he fixed it right up. Tom Hi tTom and thanks for the help but I am In Gibraltar Europe ! A bit far away from Earls and it would cost more to post than to buy ...

Stripped and cleaned the whole trigger unit and it was quite dirty. cleaned pins from first and second stage and removed Sear Engagement screw (33), sadly I then realised I needed to have divided the two components of the trigger before removing this screw so I have damaged the thread on the brass b...

Trigger Diagram

stripped the unit and spring is not broken and sits within the hollow pin and is located with a conical grub screw so it is very difficult for it not to be in place. But thanx anyways This was one of the first production of Walthers "new" two stage triggers so you can see the frame is made...

Hello,

Can anyone help me? I have a early GSP Walther "new" two stage trigger made of machined brass instead of the cast one and the trigger weight is not constant, it varies with every shot!

Any advice on how to remedy this or is this a fault on this old model?

Hi,
Sorry to deviate from the subject but I have a brass GSP Walther trigger unit and the trigger weight is not constant and changes with every shot!

Any advice on how to remedy this or is this a fault on this old model?