Page 1 of 1

Printing Targets

Posted: Thu Jan 20, 2005 7:10 pm
by Matt
I know it has been mentioned many times before, but I cannot find in the archives where to access to print 10 meter targets.

Can you help me out?

Posted: Thu Jan 20, 2005 10:43 pm
by Fred Mannis
Matt,
go to the 20/20 postal match site (http://www.airguninfo.com/matchinfo.htm). In the lower left corner you will find three links to sites that provide targets you can print out. I like the Pellant program the best.

Fred

Posted: Fri Jan 21, 2005 5:53 pm
by jhmartin
After attending a Bob Foth Clinic, I made a 10m shot calling target set on 8.5x11. I ordered blank 8.5x11 tagboard from pistoleer.com and print them on this.

Go to: http://www.omartin.com/4-H/Shooting_Sports/ and get the .PDF file

If you have Visio, download the VSD file as well and you will have the templates and stencils I worked from. Then you can easily make whatever you need.

Joel

Posted: Sun Jan 23, 2005 6:42 pm
by scout18
I tried to use the pellent program. but it did not do anything that I could see. It said that it extracted and did all that stuff, but I do not see anything else.

Printing targets

Posted: Tue Jan 25, 2005 11:04 am
by Reinhamre
Hi,
One sorce is to download this program Scatt521.exe from:
http://www.scatt.com/eng/software.htm
and under Tools - Print target, choose what you like ex. 10 meter air and the target at 8 meters. Free pistol at 12 meters and so on.

Kent

Posted: Tue Jan 25, 2005 12:20 pm
by Fred Mannis
Scout18,

The install program should have left an icon on your desktop, but you can use your file finder app to locate 'airgun75.exe'. On my computer the install program put the program 'airgun75.exe' in the followig directory:
C:\Program Files\Airgun7\

Hope this helps,
Fred

Posted: Tue Jan 25, 2005 10:14 pm
by scout18
thanks fred it did help.