Page 1 of 1
xp 100 help
Posted: Sun Oct 17, 2004 8:42 am
by Turboman
HI
Im new here,Just wondering if ya can help me alittle,Im looking to adjust my xp100 trigger,Any help would be most apreciated.
xp trigger
Posted: Fri Oct 29, 2004 10:48 pm
by mechanician
There are only two screws in a factory trigger. The screw in front of the trigger shoe sets the amount of engagement on the sear and the screw on the trigger housing itself controls overtravel.
Be careful of flakes of factory sealant getting between the point of the screw and the part that it contacts above the trigger shoe. I have had a very light and inconsistant pull because of this before.
To lighten the trigger you would have to fool around with springs on the inside and it is not recomended as you can't get it light enough and still be safe.
If you want a light trigger check with Dewey target triggers. He has a three lever trigger that can be adjusted from two ounces and up.
http://www.lasc.us/myweb/dewey.htm
I don't have his but I do have a few three lever triggers made by Bond "he doesn't make them anymore" and they are the only way to go.
.......................................................Tom C.