TargetTalk

Hello!

I'm searching for a stock - ANY STOCK - that can house a 2013/2313 barreled action. I competed in the early 2000's-2010 in 3p, and now my oldest son is getting back into the sport. When I left USNA, I had to leave the Team's stock there, but I owned the barreled action. So I have all my gear except for a stock, and I'm hoping to get back into the sport (probably just prone, being that at this point I'm an old man) and keep my son in check ;)

If you have or know of anyone that has a stock that can house a square action Anschutz, please let me know! I've been searching for a while and at this point the only option I can find is one of the new MEC stocks that's around $3k - with 4 kids and on active duty, I'm not going to be able to foot that bill...

Thanks!
Josh

Hello,
The tec-hro fanatic stock would fit the 2013 barreled action. It is still around $1,600 new without a buttplate.

https://tec-hro.de/schiesssport/en/
Looking at their website - they ship to USA directly

I have one. Let me know if interested in pictures.

Have you considered making your own stock? I made several for both my 1900 aand 2000 rifles using Home Depot oak and a table saw, plus a drill, some drill bits, and a couple of rasps, some glue and a bit of sand paper. My designed evolved over the series I built. They have worked quite well. The cost is probably less than $50. per stock if you have the tools. James Storm

Stock I have for sale. Has adapter plate for round actions and milled recess for round actions tang. 1400.00 plus shipping.

Email sent

James Storm wrote: ↑Sat Aug 24, 2024 8:20 pm Have you considered making your own stock? I made several for both my 1900 aand 2000 rifles using Home Depot oak and a table saw, plus a drill, some drill bits, and a couple of rasps, some glue and a bit of sand paper. My designed evolved over the series I built. They have worked quite well. The cost is probably less than $50. per stock if you have the tools. James Storm

I'm intrigued by this option! Do you have any pictures or schematics? I would love to do this as a project. I have a table saw, drill, drill bits, glue and sand paper, but curious how you created the bedding for the action into the stock?

SRay53txtn wrote: ↑Sun Aug 25, 2024 7:01 pm Email sent

Thanks! I responded in PM, appreciate the time!

proneshooter wrote: ↑Sun Aug 25, 2024 4:06 pm IMG_1656.jpgStock I have for sale. Has adapter plate for round actions and milled recess for round actions tang. 1400.00 plus shipping.

Thanks for posting!! Love this stock; this is the same one I had when I was competing; I had a different color. Sent you a message!

I have a anschutz wood stock that fits the 2013. I recently switched to the precise stock, so I dont need it. I can send you pictures of stock and buttplates for it, if interested.

Yes please! I’ll pm you my email address

Email address is TTJJSMITH13@gmail.com

(I dont know what a pm is)

My daughter showed me how to access the pm -

I have been out of town and just noted your message. This morning I will try to take and send to you some photos of these stocks. Jim Storm

Send me your email and I will send you some photos. If you are interested in proceeding with building one, I can give you some tips I have discovered about simplifying the build and the cost and producing a better and faster build.. Jim jamesestormmd@yahoo.com

I am not in receipt of your email address. jamesestormmd@yahoo.com

I am not the guy looking for a stock. I am a guy selling a wood stock. Anyway, email is ttjjsmith@aol.com