Page 1 of 1
IZH-35M recoil spring
Posted: Fri Mar 15, 2024 8:06 pm
by Higham
Does anyone know of a substitute spring I can use to replace a recoil spring on an IZH-35M? Or where to find a new one? Thanks in advance.
Re: IZH-35M recoil spring
Posted: Sat Mar 16, 2024 8:16 pm
by dubbyah
You might try asking on bullseyeforum.net also
Re: IZH-35M recoil spring
Posted: Sat Mar 16, 2024 8:22 pm
by dubbyah
Another thought, a recoil spring for an AW93 might work.
Re: IZH-35M recoil spring
Posted: Thu Mar 21, 2024 7:19 pm
by Higham
Thank you both for your input.
Re: IZH-35M recoil spring
Posted: Thu Mar 21, 2024 8:17 pm
by Shiloh
IF the AW93 spring would work, it would be the earlier model spring - before serial number 20000.
I don't think the later model spring (after serial number 20000) comes separately but is rather fixed to the rod. Best to check with Pilkguns to see if they have them and if the early model spring will work.
I asked a few years ago about the later model and they didn't carry in stock.
Re: IZH-35M recoil spring
Posted: Fri Mar 22, 2024 3:46 pm
by Sa-tevo
How many coils, the spring outside diameter and what is the wire thickness would be good info for people looking to see what might match up.
Re: IZH-35M recoil spring
Posted: Fri Mar 22, 2024 5:34 pm
by Higham
Sa-tevo, wire diameter is .60mm, length 136mm, spring OD 4.70mm, spring ID 3.35mm, and 5 turns in 10mm. That's the best I can come up with.
I have looked around and came up with zero...
Shiloh- I will contact Pilk.
Re: IZH-35M recoil spring
Posted: Fri Mar 22, 2024 7:19 pm
by fc60
Greetings,
Based on memory, the Walther KSP200 was a copy of the IZH-35M.
https://carl-walther.com/uploads/media/ ... 7206_c.pdf
Some parts are still available from Germany.
https://schiesssport-billharz.eu/KSP
https://schiesssport-billharz.eu/2644207-Vorholfeder
Judith is nice to deal with. Bear in mind, shipping is via DHL ($$$$).
With the part number, 2644207, you might be able to source on from Champion Choice or Earl's Walther.
Cheers,
Dave
Re: IZH-35M recoil spring
Posted: Sat Mar 23, 2024 10:12 pm
by Sa-tevo
fc60/Dave,
Good reply. I was coming from the opposite direction. Horses versus zebras when one sees a hoof print.
Re: IZH-35M recoil spring
Posted: Mon Mar 25, 2024 8:11 pm
by Higham
fc60 good info. I will start with that.
I gave the measurements to wollf springs and they are no help.
Re: IZH-35M recoil spring
Posted: Thu Mar 28, 2024 9:06 pm
by BobGee
DHL to Australia: €60! For a €10 piece which weighs in at (say) 50gm and fits in a standard Jiffy bag. Sheesh!
Bob