Aeron b98 rear sights
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
- Posts: 24
- Joined: Wed Nov 14, 2018 1:53 pm
Aeron b98 rear sights
Anyone have experience with the rear sights of an Aeron B98? Just picked one off EBay and don’t know which knob does what or which way moves the pellet on the target!
-
- Posts: 290
- Joined: Tue Oct 13, 2009 6:07 pm
- Location: Prescott, AZ
Re: Aeron b98 rear sights
Here's what my manual says: "The width of the front sight (103) can be changed by unscrewing the screw (104) and rotating the sight 120 by degrees. The windage adjustment of the rear sight is done knob (77a). Turning it clockwise moves the rear sight blade to the left. The rear sight elevation adjustment is done by knob (77b). Turning it clockwise moves the rear sight blade up."grofteevan wrote: ↑Fri May 24, 2019 8:56 am Anyone have experience with the rear sights of an Aeron B98? Just picked one off EBay and don’t know which knob does what or which way moves the pellet on the target!
Screw 77a is on the left side of the sight, so looking at the gun from its LEFT side, turn it clockwise to move the group left.
Screw 77b is on the right side of the sight, so looking at the gun from its RIGHT side, turn it clockwise to move the group up.
My sight is plainly marked on its top. See attached picture.
-
- Posts: 24
- Joined: Wed Nov 14, 2018 1:53 pm
Re: Aeron b98 rear sights
Thank You! The top of my sights are unmarked.