Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
-
AngliaUSA
- Posts: 18
- Joined: Sun Dec 04, 2011 1:55 pm
- Location: Los Angeles
-
Contact:
Post
by AngliaUSA »
One of my cylinders just blew out a seal / o ring .. see the attached pics
I have never seen a green o ring with a flat back before .. probably just from age and taking a set in the tube ..
do I need a specific factory replacement part or can I use a matching standard nitrile black O ring with silicone lube instead ...
your thoughts ?
-
Attachments
-
Last edited by
AngliaUSA on Thu Oct 15, 2015 9:23 pm, edited 1 time in total.
-
AngliaUSA
- Posts: 18
- Joined: Sun Dec 04, 2011 1:55 pm
- Location: Los Angeles
-
Contact:
Post
by AngliaUSA »
Thanx for the advice and link .. my Pistol is the FWB C55P
5 shot - Compressed air -
Anybody know if the same cylinders were used on later year pistols ? If so which models have interchangeable cylinders ?
Thanx much.
JB
-
kevinweiho
- Posts: 949
- Joined: Wed Oct 14, 2009 12:44 pm
- Location: Costa Rica, Central America
Post
by kevinweiho »
AngliaUSA wrote:Anybody know if the same cylinders were used on later year pistols ? If so which models have interchangeable cylinders?
The cylinder is interchangeable with the FWB P30, P34, and P40, not sure if it'll fit the P44.
