Page 1 of 1

Need info on CO2 filling from paint ball tanks

Posted: Mon Feb 02, 2015 9:23 am
by continental
I have a Walther CPM-1 and my bulk tank is long out of hydro-test. As an alternate to retest/refill my bulk tank, I am wondering if anyone has used the 20 and 24 ounce CO2 bulk tanks they sell for paint ball. It seems I would need an adapter and so am wondering if anyone has gone down this route and can advise me on the correct adapter or a source for such an item. I did speak with two retailers who sell the paintball tanks and they have no adapters nor advice. Thanks in advance for any help.

Re: Need info on CO2 filling from paint ball tanks

Posted: Mon Feb 02, 2015 5:20 pm
by Gwhite
I'm not sure what would be required, but these folks would know if it is do-able, and would probably have the hardware:

http://www.bestfittings.co.uk/

Re: Need info on CO2 filling from paint ball tanks

Posted: Mon Feb 02, 2015 6:28 pm
by continental
Gwhite - thank you....very interesting website. I will send them an email and see what develops Thanks again for the tip./Frank