Hi
Wondering if anyone has attempted this yet and whether its posible.
Cheers
KK500 stock with anschutz Barrell
Moderators: pilkguns, Marcus, m1963, David Levene, Spencer
Re: KK500 stock with anschutz Barrell
As the KK500 is square-based, and most Anschutz rifles are round (14/18/29/54.30), you'd need an adaptor between the stock and receiver. But it may be possible. Walther offered an Anschutz adaptor for the KK200 some years ago.
-
- Posts: 100
- Joined: Wed Sep 25, 2019 11:25 am
- Location: Fishers, Indiana
Re: KK500 stock with anschutz Barrell
I've seen a couple. Here's an example from the 2022 ASSA Nationals. This one is sitting notably higher in the stock that others I've seen.
-
- Posts: 111
- Joined: Thu Sep 11, 2014 12:35 pm
Re: KK500 stock with anschutz Barrell
I know that rifle setup well.
It's actually a Benchmark 3 groove 16 twist barrel, chambered with a Nevius Chamber.
The KK500 action was set into the 2018 Precise stock using an Esprit Carabine adapter.
It's actually a Benchmark 3 groove 16 twist barrel, chambered with a Nevius Chamber.
The KK500 action was set into the 2018 Precise stock using an Esprit Carabine adapter.
-
- Posts: 330
- Joined: Mon Mar 22, 2004 6:03 pm
- Location: state of total consciousness
- Contact:
Re: KK500 stock with anschutz Barrell
...I take good photos....;-)
-
- Posts: 111
- Joined: Thu Sep 11, 2014 12:35 pm