KK500 stock with anschutz Barrell

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
charlie-85
Posts: 1
Joined: Wed Jul 06, 2022 4:06 am

KK500 stock with anschutz Barrell

Post by charlie-85 »

Hi

Wondering if anyone has attempted this yet and whether its posible.

Cheers
Tim S
Posts: 2054
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Re: KK500 stock with anschutz Barrell

Post by Tim S »

As the KK500 is square-based, and most Anschutz rifles are round (14/18/29/54.30), you'd need an adaptor between the stock and receiver. But it may be possible. Walther offered an Anschutz adaptor for the KK200 some years ago.
1845greyhounds
Posts: 100
Joined: Wed Sep 25, 2019 11:25 am
Location: Fishers, Indiana

Re: KK500 stock with anschutz Barrell

Post by 1845greyhounds »

I've seen a couple. Here's an example from the 2022 ASSA Nationals. This one is sitting notably higher in the stock that others I've seen.
Attachments
SmartSelect_20220720-083049_Samsung Internet.jpg
SRay53txtn
Posts: 111
Joined: Thu Sep 11, 2014 12:35 pm

Re: KK500 stock with anschutz Barrell

Post by SRay53txtn »

I know that rifle setup well.
It's actually a Benchmark 3 groove 16 twist barrel, chambered with a Nevius Chamber.
The KK500 action was set into the 2018 Precise stock using an Esprit Carabine adapter.
1813benny
Posts: 330
Joined: Mon Mar 22, 2004 6:03 pm
Location: state of total consciousness
Contact:

Re: KK500 stock with anschutz Barrell

Post by 1813benny »

...I take good photos....;-)
SRay53txtn
Posts: 111
Joined: Thu Sep 11, 2014 12:35 pm

Re: KK500 stock with anschutz Barrell

Post by SRay53txtn »

1813benny wrote: Wed Jul 20, 2022 2:47 pm ...I take good photos....;-)
Confirmed!
Post Reply