New to this forum, I just picked up a Feinwerkbau P34

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
greek
Posts: 1
Joined: Wed Oct 20, 2021 12:43 am

New to this forum, I just picked up a Feinwerkbau P34

Post by greek »

This is a used gun and when i attempted to fill the cylinders one took a fill but later leaked down from a side port.
The other cylinder started leaking right away out of the same small side port hole.
Any advice?
Thanks
John
Top
User avatar
Agt. Smith
Posts: 115
Joined: Thu Sep 09, 2021 2:38 am
Location: "The Monadnock Region"

Re: New to this forum, I just picked up a Feinwerkbau P34

Post by Agt. Smith »

Sounds like there may be an o-ring behind the gauge that needs servicing.

Here's the thread: viewtopic.php?t=46839 Good luck !
Top
B Lafferty
Posts: 459
Joined: Mon Feb 12, 2018 11:23 am

Re: New to this forum, I just picked up a Feinwerkbau P34

Post by B Lafferty »

greek wrote: ↑Fri Oct 22, 2021 11:49 am This is a used gun and when i attempted to fill the cylinders one took a fill but later leaked down from a side port.
The other cylinder started leaking right away out of the same small side port hole.
Any advice?
Thanks
John
Welcome!
"No mud; no Lotus."-- Thich Nhat Hanh
Top
Post Reply

Return to “Olympic Pistol”