Air and not CO2

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
GeraldS1
Posts: 82
Joined: Thu Dec 12, 2019 3:39 pm
Location: Germany

Air and not CO2

Post by GeraldS1 »

Something suddenly occurred to me the other day.
I have been shooting my walther lp400 for the past 18 months using air from a drive tank.
Does it matter that it's not co2?
nmondal
Posts: 251
Joined: Sat Mar 13, 2021 11:06 am

Re: Air and not CO2

Post by nmondal »

They should be using compressed air, and not CO2, right?
10 M Air pistol : Walther LP 500 Basic | Earlier Hammerli AP 20 Pro.
Newbie shooting questions : http://targettalk.org/viewtopic.php?f=4&t=63530
David M
Posts: 1675
Joined: Wed Mar 24, 2004 6:43 pm

Re: Air and not CO2

Post by David M »

CO2 pistols are very different to compressed Air pistols.
They work in very different ways, and are NOT interchangable.
Church Key
Posts: 32
Joined: Sun Feb 07, 2021 6:41 pm

Re: Air and not CO2

Post by Church Key »

The LP400 is a PCP pistol; not a CO2 gun.
brent375hh
Posts: 741
Joined: Wed Apr 17, 2013 8:04 am
Location: Minneapolis

Re: Air and not CO2

Post by brent375hh »

David M wrote: Thu Jul 22, 2021 5:33 pm CO2 pistols are very different to compressed Air pistols.
They work in very different ways, and are NOT interchangable.
The original Hammerli 480 manual said either could be used. I am not sure how they made that possible. I always used compressed air in mine.
I think if your regulator is set below the pressure of Co2, it could work. I just don't know why anyone would want the deal with Co2 when they could use air.
Gwhite
Posts: 3423
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: Air and not CO2

Post by Gwhite »

You certainly don't want to try 200 bar air in a CO2 pistol. As long as the liquid CO2 stays below the regulator in a PCP pistol, the vapor pressure is around 70 bar, and the regulator should work. I'm not sure how well the typical regulators would react to have liquid CO2 sloshed through them.

A pistol like the Hammerli AP20 with the tank mounted vertically might work OK.

Fortunately, the fill adapters for CO2 are different on the tank end, so it's not something anyone is likely to try by accident.
Ade C
Posts: 80
Joined: Sun Jul 26, 2020 6:59 am
Location: UK

Re: Air and not CO2

Post by Ade C »

This has to be a joke post, right?
emre-nur
Posts: 193
Joined: Wed May 26, 2021 3:31 pm

Re: Air and not CO2

Post by emre-nur »

Ade C wrote: Fri Jul 23, 2021 1:39 pm This has to be a joke post, right?
+1
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Air and not CO2

Post by northpaw »

The owner of the first post in this thread is playing games with us,I strongly feel... :-)
GeraldS1
Posts: 82
Joined: Thu Dec 12, 2019 3:39 pm
Location: Germany

Re: Air and not CO2

Post by GeraldS1 »

Wow. Roasted. Will shut my trap on here
B Lafferty
Posts: 459
Joined: Mon Feb 12, 2018 11:23 am

Re: Air and not CO2

Post by B Lafferty »

brent375hh wrote: Fri Jul 23, 2021 7:25 am
David M wrote: Thu Jul 22, 2021 5:33 pm CO2 pistols are very different to compressed Air pistols.
They work in very different ways, and are NOT interchangable.
The original Hammerli 480 manual said either could be used. I am not sure how they made that possible. I always used compressed air in mine.
I think if your regulator is set below the pressure of Co2, it could work. I just don't know why anyone would want the deal with Co2 when they could use air.
The Crossman Challenger rifle is both pcp and CO2. I'm not certain how one switches between them, but it is clearly possible in the same unit.
"No mud; no Lotus."-- Thich Nhat Hanh
Post Reply