Real Lock Time, Barrel Time, and On Call.

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
brent375hh
Posts: 741
Joined: Wed Apr 17, 2013 8:04 am
Location: Minneapolis

Re: Real Lock Time, Barrel Time, and On Call.

Post by brent375hh »

If the time from sear release to pellet exiting the muzzle doesn't really matter, would anybody choose a pistol that took a half second to complete the task?
User avatar
6string
Posts: 445
Joined: Tue Aug 14, 2007 11:53 pm

Re: Real Lock Time, Barrel Time, and On Call.

Post by 6string »

brent375hh wrote: Fri Jun 11, 2021 9:27 pm If the time from sear release to pellet exiting the muzzle doesn't really matter, would anybody choose a pistol that took a half second to complete the task?
Hmm, maybe.
You could release the shot then take the remaining time to refine sight alignment.
With training it could be an advantage!

PS: maybe try the Cominazzo match for perspective?
Flintlock smoothbore pistol, minimum caliber of .433". Fired one hand (no Rink grip allowed!) at 25 yds on the B19 International free pistol target.
I think the lock time and barrel time are a little bit long (plus they don't allow compensators!).... 😉
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Real Lock Time, Barrel Time, and On Call.

Post by northpaw »

brent375hh wrote: Fri Jun 11, 2021 9:27 pm If the time from sear release to pellet exiting the muzzle doesn't really matter, would anybody choose a pistol that took a half second to complete the task?
A good point.
The usual barrel lenght of a free pistol is 29 cm. Similar to match air rifles, a FP could have a shorter barrel, replacing the front say 8 cm of barrel for a tube. That would reduce barrel time, and turn the FP more forgiving. Cleaning lead deposits from that tube could be a shore... What about the compensator in that case? The recoil reducing effect of a compensator for a FP is marginal anyway, due to the low muzzle pressure.
emre-nur
Posts: 193
Joined: Wed May 26, 2021 3:31 pm

Re: Real Lock Time, Barrel Time, and On Call.

Post by emre-nur »

BEA wrote: Fri Jun 11, 2021 12:55 pm I believe I am correct in saying that lock time is related to the speed of the trigger mechanism. This is the amount of time between activating the trigger and when the firing mechanism initiates ignition. Barrel time is different. Generally I think that too much emphasis is put on this issue of velocity. I figure the air pistol manufacturers do enough testing to know where their pistols shoot best in terms of velocity. Most cylinder powered pistols I have had usually go 125 to 150 rds if they start off fully charged. The short cylinder models may be a bit less. Perhaps these new models are different. I shoot an old Morini. As for the length of an air rifle barrel, I suspect the primary reason they are shorter is because once you get to a given length, the expanding gas runs out of energy. Once you get to this point, any additional barrel starts to slow the pellet down. Air rifles may have longer cylinders so this might change the ideal barrel length. I have never seen and air rifle with the barrel extension off, so I do not know what they actual length is. I have had several cylinder powered air pistols over the years. The velocity on all of them has been from about 480 to 525 fps. High speed pellets will go a little faster but I always preferred the standard weight. I could not tell any difference between them other than their balance and trigger characteristics.
one of the few that makes sense to a layperson.
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Real Lock Time, Barrel Time, and On Call.

Post by william »

northpaw wrote: Sat Jun 12, 2021 12:43 am
brent375hh wrote: Fri Jun 11, 2021 9:27 pm If the time from sear release to pellet exiting the muzzle doesn't really matter, would anybody choose a pistol that took a half second to complete the task?
A good point.
The usual barrel lenght of a free pistol is 29 cm. Similar to match air rifles, a FP could have a shorter barrel, replacing the front say 8 cm of barrel for a tube. That would reduce barrel time, and turn the FP more forgiving. Cleaning lead deposits from that tube could be a shore... What about the compensator in that case? The recoil reducing effect of a compensator for a FP is marginal anyway, due to the low muzzle pressure.
"Engage brain before operating mouth." That goes tenfold for keyboard.
"The recoil reducing effect of a compensator for a FP is marginal anyway, due to the low muzzle pressure." But 0.2 milliseconds of barrel time and a pistol's shift in center of gravity due to compressed air use are worth consideration. Really?

You might as well keep track of time using one of Salvador Dali's limp watches.
Attachments
the-persistence-of-memory-1931.jpg!Large.jpg
David M
Posts: 1675
Joined: Wed Mar 24, 2004 6:43 pm

Re: Real Lock Time, Barrel Time, and On Call.

Post by David M »

brent375hh wrote: Fri Jun 11, 2021 9:27 pm If the time from sear release to pellet exiting the muzzle doesn't really matter, would anybody choose a pistol that took a half second to complete the task?
I have one of those, sometimes very fast, mostly slow and other times a flash in the pan...but great Fun !
le Page.jpeg
le Page.jpeg (29.58 KiB) Viewed 3979 times
Last edited by David M on Sat Jun 12, 2021 2:41 pm, edited 1 time in total.
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Real Lock Time, Barrel Time, and On Call.

Post by northpaw »

Mr/Ms "W"" wrote: You might as well keep track of time using one of Salvador Dali's limp watches.
Mr/Ms "W" is struggling to give the impression he/she is a well educated man/woman. Apparently he/she is not.
Calling upon authority of celebrities like "Salvatore Dali" (translates to Dali, the salvager) is a sign of a moron, - to me at least.
If you have faith and trust in yourself and your knowledge, you do not have to refer to ancient celebrities to acquire authority.

Does Mr/Ms "W" belong to the "Flat Earth Society"? I do not know, but wound not get much surprised if he/shw was. "Macht mir keine Sorgen":-)
https://en.wikipedia.org/wiki/Flat_Earth_Society

But as Mr/Ms "W" apparently denies elementary physics, he/she may be a prime candidate.

To my fellow competitive pistoleros out there: Lock time, and barrel time does indeed matter. I believe you all realise that.
May someone, please, with much time to spare, - please try to convince Mr/Ms "W" of the realm of elementary physics. I have better ways to spend my spare time, - like going out to the 50 m range.:-)

Good bye, Mr/Ms. "W". Pleasant dreams. I wish you all the best for the future. At the ranges, and beyond, no pun intended.
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Real Lock Time, Barrel Time, and On Call.

Post by william »

northpaw wrote: Sat Jun 12, 2021 2:30 pm
Mr/Ms "W"" wrote: You might as well keep track of time using one of Salvador Dali's limp watches.
Mr/Ms "W" is struggling to give the impression he/she is a well educated man/woman. Apparently he/she is not.
Calling upon authority of celebrities like "Salvatore Dali" (translates to Dali, the salvager) is a sign of a moron, - to me at least.
If you have faith and trust in yourself and your knowledge, you do not have to refer to ancient celebrities to acquire authority.

Does Mr/Ms "W" belong to the "Flat Earth Society"? I do not know, but wound not get much surprised if he/shw was. "Macht mir keine Sorgen":-)
https://en.wikipedia.org/wiki/Flat_Earth_Society

But as Mr/Ms "W" apparently denies elementary physics, he/she may be a prime candidate.

To my fellow competitive pistoleros out there: Lock time, and barrel time does indeed matter. I believe you all realise that.
May someone, please, with much time to spare, - please try to convince Mr/Ms "W" of the realm of elementary physics. I have better ways to spend my spare time, - like going out to the 50 m range.:-)

Good bye, Mr/Ms. "W". Pleasant dreams. I wish you all the best for the future. At the ranges, and beyond, no pun intended.
As any psychotherapist can inform you, projection is perhaps the most perilous defense mechanism. One need not be terribly well educated to confirm from any reliable source that the Catalan/Spanish artist's name is, indeed, SALVADOR, which any educated person knows translates to "Savior," not "Salvager." Look it up, clown!

As to any discussion of "elementary physics," practical mechanics and physiology will trump my obviously star-struck fanboy/girl's fixation on trivialities - every time. It would take more effort than it's worth to determine which is the more risible: a 200 microsecond difference in barrel time (that's MICROseconds) or the change in center of gravity of a pistol / shooter's arm system by the expelling of a few grams of air distributed over an entire match. At day's end we can have a good laugh at both.

Western minds abandoned discussions of angels dancing on the head of a pin centuries ago. Maybe "Old Europe" remains mired in a medieval mindset.
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Real Lock Time, Barrel Time, and On Call.

Post by william »

David M wrote: Sat Jun 12, 2021 1:35 pm
brent375hh wrote: Fri Jun 11, 2021 9:27 pm If the time from sear release to pellet exiting the muzzle doesn't really matter, would anybody choose a pistol that took a half second to complete the task?
I have one of those, sometimes very fast, mostly slow and other times a flash in the pan...but great Fun !
le Page.jpeg
David, I don't know where you're located, but I remember old-timers in Maine and New Hampshire affectionately calling them "flinch-lock." Now, those guys were SHOOTERS!

When I was a 45 year-old blackpowder newbie, they poked fun at me for taking the coward's path - caplock.
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Real Lock Time, Barrel Time, and On Call.

Post by northpaw »

william wrote: Sat Jun 12, 2021 4:14 pm clown!
northpaw wrote: Sat Jun 12, 2021 2:30 pm Goodbye, "W". Wish you all the best for the future. At the ranges, and beyond, no pun intended.
Chears,
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Real Lock Time, Barrel Time, and On Call.

Post by william »

northpaw wrote: Sat Jun 12, 2021 4:31 pm
william wrote: Sat Jun 12, 2021 4:14 pm clown!
northpaw wrote: Sat Jun 12, 2021 2:30 pm Goodbye, Mr/Ms. "W". Pleasant dreams. I wish you all the best for the future. At the ranges, and beyond, no pun intended.
Don't let the door hit you on the way out.
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Real Lock Time, Barrel Time, and On Call.

Post by northpaw »

northpaw wrote: Sat Jun 12, 2021 4:31 pm
william wrote: Sat Jun 12, 2021 4:14 pm clown!
northpaw wrote: Sat Jun 12, 2021 2:30 pm Goodbye, "W".
Cheers,
It has been entertaining... :-) Have the idea struck you that you may have been framed, "W". LOL. Ich danke Ihnen..
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Real Lock Time, Barrel Time, and On Call.

Post by northpaw »

How lousy does it get, - Mr/Ms "W" has not answered yet. Maybe he/she is asleep? Or reading elementary booklets over the topics of elementary physics, for youngsters?

Barrel time, and lock time, are paramount measures interfering on accurate shooting. Please, do not tell Mr/MS "W" as his/her blood vessel pressure may reach alarming levels. :-)

May I say "get lost" to my pal "W"? No way. I feel well informed and slightly superior to "W" regarding physics ( excuse me for that expression: superior) to "W", so let us continue the "debate":-)
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Real Lock Time, Barrel Time, and On Call.

Post by william »

northpaw wrote: Sat Jun 12, 2021 5:00 pm How lousy does it get, - Mr/Ms "W" has not answered yet. Maybe he/she is asleep? Or reading elementary booklets over the topics of elementary physics, for youngsters?

Barrel time, and lock time, are paramount measures interfering on accurate shooting. Please, do not tell Mr/MS "W" as his/her blood vessel pressure may reach alarming levels. :-)

May I say "get lost" to my pal "W"? No way. I feel well informed and slightly superior to "W" regarding physics ( excuse me for that expression: superior) to "W", so let us continue the "debate":-)
Macbeth said it best:
"...It is a tale
Told by an idiot, full of sound and fury,
Signifying nothing."


My fanboy/girl has got his/her way. He/she can have the whole forum to him/herself (or perhaps itself if he/she is really a bot) to spread his/her/its utter nonsense. It is said: "Never argue with an idiot. He'll drag you down to his level, and beat you with experience." I won't be bothered with a self-described expert who stands by 200 microseconds and milligrams of air as significant factors in the delivery of a shot.
Rover
Posts: 7050
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Real Lock Time, Barrel Time, and On Call.

Post by Rover »

Aww shit, I'm out of beer and popcorn.
northpaw
Posts: 296
Joined: Fri Dec 13, 2013 12:15 pm
Location: Nordrhein-Westfalen

Re: Real Lock Time, Barrel Time, and On Call.

Post by northpaw »

william wrote: Macbeth
william wrote: Salvatore Dalli
william wrote: idiot
(I´m not out of popcorn)
emre-nur
Posts: 193
Joined: Wed May 26, 2021 3:31 pm

Re: Real Lock Time, Barrel Time, and On Call.

Post by emre-nur »

northpaw wrote: Sun Jun 13, 2021 2:23 am
william wrote: Macbeth
william wrote: Salvatore Dalli
william wrote: idiot
(I´m not out of popcorn)
I wonder how "Real Lock Time, Barrel Time, and On Call" turned into this?
brent375hh
Posts: 741
Joined: Wed Apr 17, 2013 8:04 am
Location: Minneapolis

Re: Real Lock Time, Barrel Time, and On Call.

Post by brent375hh »

A 25 fps deviation IS more pronounced on target at 450 fps than it is at 550 fps.
Rover
Posts: 7050
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Real Lock Time, Barrel Time, and On Call.

Post by Rover »

I'm waiting for Levene to jump into this at any second as "pivot man" for this circle-jerk.
Ricardo
Posts: 254
Joined: Fri Oct 09, 2009 6:13 pm
Location: Dallas, Texas

Re: Real Lock Time, Barrel Time, and On Call.

Post by Ricardo »

I thought Northpaw said he didn't have time for this...
Locked