Hello all,
One of my Morini 162EI cylinders is leaking.
Can you please inform suppliers in Europe selling this?
Thank you
Luis
Morini 162EI cylinders - Europe
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Re: Morini 162EI cylinders - Europe
I was going to recommend Krale, but they don't seem to sell Morini air pistols. I'd contact Morini and ask them. They probably also sell direct.
There is Edinkillie in Scotland: http://www.edinkillie.co.uk/ecatalog/mo ... -1617.html, but I'm sure there are quite a few shops that can get them for you. Anyone who sells Gehmann for example.
There is Edinkillie in Scotland: http://www.edinkillie.co.uk/ecatalog/mo ... -1617.html, but I'm sure there are quite a few shops that can get them for you. Anyone who sells Gehmann for example.
Re: Morini 162EI cylinders - Europe
Hello,
Thank you.
Waiting for a replay from Moroni.
Best regards
Luis
Thank you.
Waiting for a replay from Moroni.
Best regards
Luis
Re: Morini 162EI cylinders - Europe
Take a bit of silicone based light oil and libe the pin valve on the tank..... Exercise it with a small dowel or a punch and free up the valve.... They tend to get crusty with light corrosion and oil and exercise usually does the trick
-
- Posts: 68
- Joined: Wed Jul 15, 2020 4:24 pm
Re: Morini 162EI cylinders - Europe
I have had good experience with shootingequipment.de
https://www.shootingequipment.de/en/Wea ... =%20morini
https://www.shootingequipment.de/en/Wea ... =%20morini
Re: Morini 162EI cylinders - Europe
Thank you JonPersson ,
One long red on my way from SE.
No reply's from Morini so far :-(
best regards
One long red on my way from SE.
No reply's from Morini so far :-(
best regards