Has anyone changed out the seals in their Matchguns MG1H? I hadn't shot mine in a couple of years due to severe joint problems, but now that those have cleared up my MG1H won't hold pressure. Rather than starting with contacting Matchguns, I thought I'd ask whether anyone here had replaced the seals on one before. Given the ever-interesting engineering of their products this could be either a nightmare or the height of simplicity (assuming the former).
Thanks in advance.
Changing seals in Matchguns MG1H
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Re: Changing seals in Matchguns MG1H
you can study the exploded diagram.
https://www.krale.shop/media/blfa_files ... -min_2.pdf
from what i see most of the orings are accessible but the manual does not state sizes and construction material
https://www.krale.shop/media/blfa_files ... -min_2.pdf
from what i see most of the orings are accessible but the manual does not state sizes and construction material