Got myself a SCATT trigger system and i have to ask if someone else have used it. All i got is a flat green line for the last second. In most of the shots the line begin in 100 % and end at..... 100%. I want to change the x and y axis to see what really happens. Or zeroing it there i want. Now then i reach the breaking point its close to 90% it would be nice if i could change that to 0% so the release would be 100% to get a better resolution.
Anyone who have an idea what to do?
SCATT trigger system
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
-
Mikael Andersson
- Posts: 3
- Joined: Thu Mar 31, 2005 3:13 am
- Location: Sweden
Re: SCATT trigger system
Hello,
I'm having the same problem with my SCATT trigger sensor while shooting air pistol. For the last second before the shot, the trigger sensor is maxed out at 100% on the graph (or even higher than 100%???). Does anyone know if it is possible to adjust the trigger pressure axis to go from say 80%-100% instead of 0-100?
I'm having the same problem with my SCATT trigger sensor while shooting air pistol. For the last second before the shot, the trigger sensor is maxed out at 100% on the graph (or even higher than 100%???). Does anyone know if it is possible to adjust the trigger pressure axis to go from say 80%-100% instead of 0-100?
-
John Marchant
- Posts: 192
- Joined: Fri Apr 29, 2005 4:35 pm
- Location: Bedfordshire, England
- Contact:
Re: SCATT trigger system
You may find that the trigger sensor has been preset for the lower trigger pressure used on rimfire rifles. I presume that there may be a way in the software to reset the base trigger pressure to a higher value so that pistol trigger pressure can be recognised.
Follow me on Facebook https://www.facebook.com/TenringsCoaching/