air pistol components

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
User avatar
Azmodan
Posts: 427
Joined: Tue Feb 19, 2019 4:00 pm
Location: Romania

air pistol components

Post by Azmodan »

hi
can you clarify for me some of the components of an air pistol (stuff that appears in brochures). what it is and what it does:
1) absorber
2) compensator
3) stabilizer (gas ports)

thank you
Airpistol: Feinwerkbau P8X
STP: Pardini SP
CFP: Pardini HP
Freepistol: TOZ-35
PPC: CZ Shadow 2
PCC: Nova Modul CTS9
BR50: CZ 457 LRP
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: air pistol components

Post by william »

Azmodan wrote: Wed Feb 27, 2019 7:20 am hi
can you clarify for me some of the components of an air pistol (stuff that appears in brochures). what it is and what it does:
1) absorber
2) compensator
3) stabilizer (gas ports)

thank you
I'll save Rover the effort.
1. Absorber - nothing of value
2. Compensator - nothing of value
3. Stabilizer - (You guessed it) nothing of value
User avatar
Azmodan
Posts: 427
Joined: Tue Feb 19, 2019 4:00 pm
Location: Romania

Re: air pistol components

Post by Azmodan »

william wrote: Wed Feb 27, 2019 7:52 am

I'll save Rover the effort.
1. Absorber - nothing of value
2. Compensator - nothing of value
3. Stabilizer - (You guessed it) nothing of value
not very helpful...

i know these have to do with recoil reduction, but i was under the impression they are different names of the same "system"
but now i have seen all 3 as distinct points in a pistol presentation
Airpistol: Feinwerkbau P8X
STP: Pardini SP
CFP: Pardini HP
Freepistol: TOZ-35
PPC: CZ Shadow 2
PCC: Nova Modul CTS9
BR50: CZ 457 LRP
David M
Posts: 1675
Joined: Wed Mar 24, 2004 6:43 pm

Re: air pistol components

Post by David M »

1) absorber - usually a moving counter mass driven by pawl/spring or air pulse
2) compensator - directional porting on the end of barrel.
3) stabilizer (gas ports) - drillings in barrel usually mid barrel.
Rover
Posts: 7052
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: air pistol components

Post by Rover »

OK, now you know, but did it in any way help you?

William had it right.
User avatar
m1963
Posts: 610
Joined: Sat Feb 20, 2010 9:13 am
Location: Ohio

Re: air pistol components

Post by m1963 »

Azmodan wrote: Wed Feb 27, 2019 7:20 am hi
can you clarify for me some of the components of an air pistol (stuff that appears in brochures). what it is and what it does:
1) absorber
2) compensator
3) stabilizer (gas ports)

thank you
This is a good question. The mechanics of each have been identified, above. The real answer is actually less about what each maker's individual solution is for perceived recoil and/or muzzle flip, and more about what you determine each individual solution is doing for you. Often, a simple weight placed at the muzzle end of the pistol does more for a pistol shooter, than any of the above. By the way, not everyone posting on here is a curmudgeon/roadman. Please, ask questions and many here will try to help.

Kind regards,
m1963
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: air pistol components

Post by william »

Rover wrote: Wed Feb 27, 2019 4:12 pm OK, now you know, but did it in any way help you?

William had it right.
Rog, it's the old story about the light plane pilot whose nav systems go out somewhere over western Washington state, so he radios for anybody who can help tell him where he is. Unfortunately, the first to respond was the Microsoft Tech Support Center who informs him, "Sir, you're in an airplane."
David M
Posts: 1675
Joined: Wed Mar 24, 2004 6:43 pm

Re: air pistol components

Post by David M »

Tower..."But what is your actual height and position ?"
Pilot..." I am six foot one and sitting in the front."
Post Reply