Steyr LP5 value
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
ProdigalSon
- Posts: 55
- Joined: Sat Oct 08, 2016 1:56 pm
Steyr LP5 value
I’m looking to get back into air pistol and I’ve been casually looking for some equipment. I found an ad for a Steyr LP5 locally, with 2 magazines and 2 cylinders (presumably the originals, so probably technically expired). It’s had a slot milled in the barrel shroud for a ring to mount a dot sight. It looks intriguing, but I have no idea what it could be worth. What would be a reasonable price for something like that?
-
deadeyedick
- Posts: 1191
- Joined: Thu Jan 24, 2008 5:55 pm
- Location: Australia
Re: Steyr LP5 value
Depends what country you live in.
-
ProdigalSon
- Posts: 55
- Joined: Sat Oct 08, 2016 1:56 pm
Re: Steyr LP5 value
Good point. I live in the northwestern US
Re: Steyr LP5 value
I purchased one LNIB a few years ago from Airguns of Arizona for $600.ProdigalSon wrote:Good point. I live in the northwestern US
Re: Steyr LP5 value
For reference, there is a CO2 LP5 on Gunbroker.com that has a current bid of $1026. Pretty suprising since it is labeled as a Steyr 91.
https://www.gunbroker.com/item/788770301
https://www.gunbroker.com/item/788770301
Re: Steyr LP5 value
That piece is clearly labelled LP-5, albeit in a very fuzzy photograph.crrmeyer wrote:For reference, there is a CO2 LP5 on Gunbroker.com that has a current bid of $1026. Pretty suprising since it is labeled as a Steyr 91.
https://www.gunbroker.com/item/788770301
I believe that Don used ADCO mounts for the red ot on the LP-5. He modified a set of ADCO mounts to fit a reddot on my Pardini SP. However upon closer inspection of the fuzy photos it appears that he cut a groove in the shroud of the LP-5 to accomodate the bottom ring screw.