Customizing free pistol's grip

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
xman1981
Posts: 31
Joined: Mon Jul 11, 2016 3:23 am

Customizing free pistol's grip

Post by xman1981 »

Hello guys, do you know what kind of putty does he uses? (red ring)
Image
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Customizing free pistol's grip

Post by william »

Of all the acceptable putties / fillers in the world does it have to be that one? What's so special about it?
Rover
Posts: 7052
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Customizing free pistol's grip

Post by Rover »

+1

Go to the hardware store and buy a cylinder of kneadable epoxy in any of the hot new decorator colors that strike your fancy.
Gwhite
Posts: 3423
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: Customizing free pistol's grip

Post by Gwhite »

It looks a lot like the QuikWood I've used.

http://www.polymericsystems.com/epoxies ... ikwood.htm

It (or similar products) are widely available at hardware stores, Home depot, Lowes & specialty woodworking suppliers.
SteveT
Posts: 287
Joined: Sat Mar 06, 2004 8:17 pm
Location: IL
Contact:

Re: Customizing free pistol's grip

Post by SteveT »

JB Kwikwood and PC Lumber Are the two most common wood filler epoxy putties in the US and online. They are easy to mold and easy to sand / carve. One or both are available at my local hardware and home stores as well as Amazon and other online sources. JB Weld, Bondo, plumbers putties, steel putties and other epoxy putties are (IMO) too hard.

https://www.jbweld.com/products/kwikwoo ... -putty-1oz

https://www.pcepoxy.com/products/emerge ... pc-lumber/

I am sure all the top shooters use either Morini or Rink grip putty. It may be the same thing, but it has to be worth a few more points than cheap stuff the local hardware store or Amazon. Right?
Jon Math
Posts: 125
Joined: Fri Nov 11, 2016 12:46 pm
Location: Southern New England

Re: Customizing free pistol's grip

Post by Jon Math »

What is the grip itself made of? It really does not look like wood.
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: Customizing free pistol's grip

Post by william »

Jon Math wrote:What is the grip itself made of? It really does not look like wood.
The grip appears to be made from extremely thick equipment control stickers.
slofyr
Posts: 273
Joined: Sun Oct 10, 2004 1:12 pm
Location: Pacific NW

Re: Customizing free pistol's grip

Post by slofyr »

william wrote:..The grip appears to be made from extremely thick equipment control stickers.
I am stunned, William actually has some sense of humor. There is hope for humanity.
Jon Math
Posts: 125
Joined: Fri Nov 11, 2016 12:46 pm
Location: Southern New England

Re: Customizing free pistol's grip

Post by Jon Math »

william wrote:
Jon Math wrote:What is the grip itself made of? It really does not look like wood.
The grip appears to be made from extremely thick equipment control stickers.
LOL it does have a few!
xman1981
Posts: 31
Joined: Mon Jul 11, 2016 3:23 am

Re: Customizing free pistol's grip

Post by xman1981 »

william wrote:Of all the acceptable putties / fillers in the world does it have to be that one? What's so special about it?
I do not know, probably nothing. I just gave this photo as an example.
Post Reply