Steyr grip LP10 vs. EVO

[Reinhamre]

Can I use an old Nill LP10 grip on the new EVO?
In this case an EVO E version so I will need to use a router to make room for the electronic.
Is the base the same as on a LP10? Will a grip from a LP10 fit an EVO?

Today I have a LP10E and this model has a different way of fastening the grip, Steyr has as I understand it gone back to a screw at the bottom.

Have ordered a EVO E!

[hundert]

you won't get an answer, probably not even from Steyr. You'll have to compare when it arrives.

Here's a picture of a modified LP10 Grip for 10E.
http://toz35.blogspot.de/2010/08/adapte ... p-for.html

[Reinhamre]

IF an old LP10 grip can be mounted on an EVO, then there is only one thing to do and that is to cut out for electronic.
In Igor´s case he had to think about the fastening screw as well, a lot more to deal with.

Does anyone have a LP10 and an EVO?

I do not fancy the idea of selling my Nill grip if I can use it. Nill will never make grip for an EVO E.

[Silvershooter]

An LP10 (mechanical) grip will fit an Evo 10 mechanical trigger pistol no problem and vice versa. Just needs a M5X55 bolt for the Evo as it has a shorter grip rod.
But I notice on the Evo 10E parts list the grip fixing bolt (screw) part no 147 is a M4X30.

http://www.steyr-sport.com/en/downloads ... 0-e-1/file